Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Scms
-
15th November 2003, 07:35 PM #1
Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
Scms
This is how I built in my SCMS into my workbench. The saw is level with the bench and the extra fence on the left side is 2 metres and on the right side a further metre.
Peter.
-
15th November 2003 07:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th November 2003, 07:37 PM #2
Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
The fence has 3 sliding lift up stops on each side and together with the 500mm spacer stick can be used for all measurements. The measuring tape is an ordinary dressmakers tape fixed to the fence with double sided adhesive carpet tape.
Peter.
-
15th November 2003, 07:39 PM #3
Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
And this is a close up.
Peter
-
16th November 2003, 08:36 PM #4
you're gunna need a tray
- Join Date
- Oct 2003
- Location
- Kempsey NSW
- Age
- 66
- Posts
- 1,140
Wow Peter
Is that a workshop or a hospital?
I love your setup.
Well done
Cheers
JimCheers
Jim
"I see dumb peope!"
-
16th November 2003, 08:47 PM #5
Senior Member
- Join Date
- Oct 2003
- Location
- Gold Coast,Australia
- Age
- 49
- Posts
- 350
You sure do love that orange paint. ;-)
Very inspiring, i am planing something similar with my dropsaw.
but a mobile version that stores my gal toolboxes on slidout shelves. The stops will be similar to your setup. I shall post pic soon
G
Reply With Quote
