Thread: King Size Single Bed Plans

I've been trying to avoid logging on after a recent bout of lunacy (literally) but I can't resist...

There has either been a very recent thread about this or I have recently done a search on a similar topic, I can't remember which. Anyhow, the good oil is that you would be best served by finding a bed/plan you like, copy it, and adjust the dimensions to suit the mattress you intend to buy. Apparently different manufacturers have different ideas of what size, for example, a "king single" should be.

Can't help you out with plans; when in doubt I like to do a google image search. I also recommend a search of the boards, cos I know that a king single bed has been made in the last month or two by a darkside aligned member. Oh, alright, it was Derek. I'm too Fridayed to find the link, sorry, man.

Good luck,
Rusty.

Ezy beds these days consist of angle iron sides bed head and end and slats mattress on top
My limited advive go to the smith family etc.. and buy a bed without mattress
use the angle iron sides & slats and make a bed head and base
now the designs for these are many and varied but get the fixtures first
then ask for designs for bed head etc..
Remember the standard size mattress is the size to work off





The trouble with life is there's no background music.

I was in the same position as a teenager......tall kid....small bed.
My kingsize single was 7ft2 long and 4 ft wide.....made to order.
If grows out of this......i will manage him for a flat 10%
I hope this helps.

Steve

Originally Posted by meerkat

Anyone got any plans or dimensions etc that I can use ?

Thanks

As rusty said, exact mattress dimensions vary slightly between manufacturers but here is a list that I got from a major Aussie manufacturer - can't remember which one.

King: 6' x 6'8" = 183cm x 204cm
Queen: 5' x 6'8" = 153cm x 204cm
Long Double: 4'6" x 6'8" = 138cm x 204cm
Double: 4'6" x 6'2" = 138cm x 188cm
Wide Single: 3'6" x 6'2" = 104cm x 188cm (3/4 Bed)
King Single: 3'6" x 6'8" = 104cm x 204cm
Long Single: 3' x 6'8" = 90cm x 204cm
Single: 3' x 6'2" = 90cm x 188cm

I have a king single ensemble but am sorry I bought it - too hard to find decent quality linen such as Sheridan to fit. There's not the same range available as with King and Queen doubles.

regards
Coldamus

I've made king singles for both of my kids (Tassie Oak frame with pine slats, see photos). You probably don't need a plan... I just made it up as I went along. Buy your matress first, then plan your dimensions around the matress to get the right height and size. Allow 2 cm extra in length and width to make making the bed easier. To attach the rails to the headboard you can buy appropriate hardware from Bunnings etc. to make dissassembly easy -- king singles, fully assembled, are hard to move around tight corners.

I also made matching trundle beds for friends sleepovers. The trundles can be standard size and they fit easily under the king single dimensions.

Hi Custos,
Would you be interested in making an extra bed ?
Helen

As a few of the other guys mentioned ... get the mattress first ... it'll prevent a lot of cursing and swearing later.
Also, as mentioned previously ... make it up as you go ... with the one (BIG) exception of planning how you are going to get the bed into the room.

Good luck.

Hi all!
I am in the exact position as my son touches the end of his bead sometimes his feet are sore when he wakes up in the mornings.
I thought to stretch his bead a little more but I am new to carpentry Quite willing to learn but may be leave it for later.
Anyone here makes beds of contacts please?
I would be grateful to you

Thanks

Originally Posted by custos

I've made king singles for both of my kids (Tassie Oak frame with pine slats, see photos). You probably don't need a plan... I just made it up as I went along. Buy your matress first, then plan your dimensions around the matress to get the right height and size. Allow 2 cm extra in length and width to make making the bed easier. To attach the rails to the headboard you can buy appropriate hardware from Bunnings etc. to make dissassembly easy -- king singles, fully assembled, are hard to move around tight corners.

I also made matching trundle beds for friends sleepovers. The trundles can be standard size and they fit easily under the king single dimensions.

Custo bed looks awesome do you have a Plans/Blueprint for what you made or any tips on how to make it

Ricardito. I've just recently built a King Single for my step daughter (who is taller than both her mum and me).
A mate of mine was getting rid of an old timber queen size bed for free; alternatively check around your area, or check the local newspaper.
As it was in my budget ($0), I took the bed off my friends hands, trimmed down the end pieces and slats to size, cleaned up the timber, made new fittings for the bed bolts and built new legs ... voi-la ... a relatively simple construction for a king single bed.

So look around for other beds which you can use for parts or ideas.

Good luck.

Thanks for the suggestion
In fact the bed frame is in excellent condition and since my wife say that the frame (At my son's feet) is not needed I though to use this top spare timer to extend width and lenght buy using dowling plugs.
What do you think?
Pardon my lack of woodie lingua

Ricardito,

dowelling the bed (to extend) may be a little risky ... it 'may' (or may not) be strong enough. If you wanted to extend (rather than shorten a larger bed, like I did), I'd be tempted to use threaded steel rod or bolts which can be used to pull the joint together.
I guess I'm somewhat from the school of over-engineering where possible.

also ... FYI ... a pic of the bed I've made, during construction.

Looking good thumb trimmer really coming along

Originally Posted by thumb trimmer

Ricardito,

dowelling the bed (to extend) may be a little risky ... it 'may' (or may not) be strong enough. If you wanted to extend (rather than shorten a larger bed, like I did), I'd be tempted to use threaded steel rod or bolts which can be used to pull the joint together.
I guess I'm somewhat from the school of over-engineering where possible.

also ... FYI ... a pic of the bed I've made, during construction.

yes that's exactly what I want to make just a simple frame with the right size slats then I attach the bedhead although narrower it will still hold the pillows in place.
How is this frame joined in the corners apart from threaded steel rod or bolts?
But Where would I find reasonable good pine timber currently is contoured round edges (routered) but I would not mind going for straight edges I just sand them a bi so they won't be sharp.
Would Bunnings have suitable pine for a bed frame?
Or other suppliers in Melbourne?
Thanks