Alternative to Festool clamps on homemade MFT

**I_wanna_Shed** · 20th June 2011, 09:04 PM

Hello,

I've realised that some form of table (similiar to the Festool MFT) would be very handy. A good height, and proviso for clamps and what not to make life easier while enjoying the wonderful world of Dominos. It would also be very good for holding work while sanding.

The table itself should be easy to knock up - just MDF on legs with holes drilled throughout.

BUT... I've seen the price of these MFT-SP clamps

There HAS to be an alternative..... Does anyone know of any of these that are much cheaper? The standard sliding toggle clamps that you get from McJing's etc are too high. These MFT-SP's are nice and low, very close to the bench - meaning they won't stick up above the work, which would make sanding easier.

Thanks for your feedback.

Nathan.

**Bryan1982** · 20th June 2011, 09:24 PM

hi nathan

i bought some walko clamps at the timber and working with wood show about $60 from vektools they are exactly the same as the festool clamps.

Cheers Bryan

**I_wanna_Shed** · 20th June 2011, 09:29 PM

Hi Bryan,

I just Googled those thanks to you. I picked up a Festool 105 sander from VEK at the show - can't believe I didn't see these! (Just on that note, I've always received nothing but excellent service from VEK at Narellan - my first stop now for any machinery, especially Festool).

VEK's Smithfield shop is 3 minutes from work, so I will call in there and see if they have any left.

Thanks for the heads up!

Nathan.

Thread: Alternative to Festool clamps on homemade MFT

Thread Tools

Search Thread

Alternative to Festool clamps on homemade MFT

Similar Threads

Makita / Festool guide rail clamps

My Homemade cnc

Homemade Sash Clamps

Sash clamps versus Bessey K series clamps

which brand g-clamps and sash clamps??

Tags for this Thread

Posting Permissions