Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: CMS Y connector on CT Midi
-
9th October 2012, 08:50 PM #1New Member
- Join Date
- Feb 2007
- Location
- Australia
- Posts
- 9
CMS Y connector on CT Midi
Hi all,
I want to connect the y shaped extractor hose onto the CMS/ 1400 Router combo - but the connection point on a CT Midi is on top!
AND the cost for the hoses alone is $180!!!
Anyone suggest a solution- other than making up a short leader hose?
cheers.
-
9th October 2012 08:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th October 2012, 11:31 PM #2
Hi Jaydee.
There a new adapter just for this purpose. It extends the MINI/MIDI port by 50cm with ID of 36mm, enabling the easy connection of the CMS Y-hose.
Part number 499196.
Hope that helps.
-
10th October 2012, 10:46 AM #3New Member
- Join Date
- Feb 2007
- Location
- Australia
- Posts
- 9
Similar Threads
-
vacuum connector help required
By mic-d in forum DUST EXTRACTIONReplies: 10Last Post: 13th April 2012, 11:13 AM -
removing connector bolts / cross dowels
By Chopstick in forum WOODWORK - GENERALReplies: 5Last Post: 7th November 2011, 08:32 AM -
guide rail connector
By fubar in forum FESTOOL FORUMReplies: 1Last Post: 29th September 2011, 11:53 PM -
dinse connector were to buy
By welder in forum WELDINGReplies: 3Last Post: 25th January 2011, 05:37 PM -
Brass connector bolts
By cultana in forum WOODWORK - GENERALReplies: 8Last Post: 5th November 2009, 01:39 AM