Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: CTL Midi and Y-piece
-
17th September 2008, 04:01 PM #1New Member
- Join Date
- May 2008
- Location
- Cape Town, South Africa
- Posts
- 4
CTL Midi and Y-piece
Hi all,
I've recently joined the Festool world with the purchase of a Domino and a CTL MIDI. The price difference between the MIDI and the CTL 22 was too much for me to bear, but I've run into a bit of a problem: it seems from the accessory list for the different models that the Y piece, which I think splits the airflow at the intake port, is incompatible with the MIDI. I can see why -- the location of the intake on the MIDI wouldn't leave much room, I think, for the Y piece.
I'd like to use the MIDI for my Triton router table for over & under-table dust extraction. Has anyone else run into this problem or have any suggestions?
Cheers,
Marvin
-
17th September 2008 04:01 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th September 2008, 12:23 AM #2
I believe the dust fittings are universal between all Festo vacs past and present (at least they are between my SR205 and Dad's CT22)
If the Y piece wont fit the body of the MIDI you could try a short piece of 50mm hose between the dust port and the Y
ian
Similar Threads
-
ct midi
By DTool in forum FESTOOL FORUMReplies: 16Last Post: 25th June 2008, 02:04 PM -
Jet VS Delta Midi
By Skewpid in forum WOODTURNING - GENERALReplies: 18Last Post: 23rd October 2006, 08:24 PM -
an australian midi site
By jow104 in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 0Last Post: 27th June 2006, 06:30 PM -
Jet Midi Lathe
By Coldamus in forum WOODTURNING - GENERALReplies: 3Last Post: 6th June 2005, 04:46 AM