Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 22 of 22
Thread: Domino Joint Fails
-
22nd July 2007, 07:12 PM #16Retired
- Join Date
- Jul 2007
- Location
- Kiewa
- Age
- 64
- Posts
- 1,636
Lignum,
Don't worry. There are other work around solutions. I promise, when I post the pics, you won't notice the difference. And I won't be posting the pics until the perfectionist in me says it's time.
All I can say is that it takes years to complete the fitout on a 9 x 16M shed.
.... But if you know about a glue that fills 12mm, please tell me about it! Can it do 25mm as well?
Jeff
-
22nd July 2007 07:12 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
22nd July 2007, 08:28 PM #17
Well I've had a bit of a muck around today, and if I clamp a 4mm domino in the vice, I can (I've proved it) snap it with a pair of pliers and a lot of effort.
A 4mm tenon in pine would easily snap at the same time, and I could snap KD hardwood as well but I needed a hammer!
I drilled a pair of matching domino slots in a bit of KD hardwood, held one in the vice and belted the other (no glue) to try to break the domino in shear. Couldn't do it, but did break one by belting the timber sideways and sort of twisted it off. Again, this is understandable!
I still think the joint failed because the glue failed, and something had to give.... but I want to see how the shear failure came about, I suspect that maybe when the joint failed it twisted and snapped the domino?
Cheers,
P
-
22nd July 2007, 09:30 PM #18GOLD MEMBER
- Join Date
- Jan 2006
- Location
- Bowral, NSW, Australia
- Age
- 74
- Posts
- 1,471
Thank you for the replies. The finished articles are pictured below. Timber supplied by my son whose instructions were:
* something to rest a beer on
* nothing fancy
* only use the victorian ash supplied
I experimented with U beaut's white shellac and traditional wax. I'm after a finish that doesn't yellow on vic ash. I'm impressed.
The Richmond stubby holders don't get a lot of use these days, unfortunately.
Graham
-
23rd July 2007, 09:34 PM #19
Well I've had a bit of a muck around today, and if I clamp a 4mm domino in the vice, I can (I've proved it) snap it with a pair of pliers and a lot of effort.
I drilled a pair of matching domino slots in a bit of KD hardwood, held one in the vice and belted the other (no glue) to try to break the domino in shear. Couldn't do it, but did break one by belting the timber sideways and sort of twisted it off. Again, this is understandable!
________________________________________________________________________________
THE ABOVE by BM has touched on one possible that whether that Domino (heaven forbid) was the one weak link in the chain.
With the multitude of Dominoe's produced (and it is merely coincidental) would it not be possible that the occasional one could be suspect and not be of sufficient integrity to sustain the forces implied?
Although I have yet to see a failure of a Domino apart from this incident there remains as always "Murphy's Law" that something will always go wrong.
With Festools QC and high expectation of their product it does not mean that even the better known companies don't have their issues!!
A sceptic can sometimes be a healthy attitude
CheersJohnno
Everyone has a photographic memory, some just don't have film.
-
24th July 2007, 01:35 PM #20.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 5,215
-
24th July 2007, 02:13 PM #21
-
24th July 2007, 09:43 PM #22
Quote:
Originally Posted by Lignum
Where did you get a 4mm Domi
I suspect I meant 5mm!
P
Thanks for the correction BM
CheersJohnno
Everyone has a photographic memory, some just don't have film.
Similar Threads
-
New Domino Joint Tests
By TexasWoodRat in forum WOODWORK - GENERALReplies: 12Last Post: 17th May 2007, 01:33 PM -
Is the Domino the best tool for this job?
By journeyman Mick in forum FESTOOL FORUMReplies: 13Last Post: 26th January 2007, 06:59 PM -
Stop Press: 3 10x50 domino joint tested to 5 tonnes!
By TassieKiwi in forum FESTOOL FORUMReplies: 16Last Post: 23rd January 2007, 06:06 PM -
Is the Domino the best tool for this job?
By journeyman Mick in forum FESTOOL FORUMReplies: 3Last Post: 9th January 2007, 07:26 AM