Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: dominos snug fit
-
3rd August 2006, 09:08 PM #1New Member
- Join Date
- May 2004
- Location
- eraring
- Posts
- 8
dominos snug fit
having just purchased the domi Im very impressed with her speed and very snug joints. one thing I have found helpfull when dry fitting up a job is to put the dominos in the microwave on high for about 30secs each Ive only tried this with the 6mm x 40mm doms it takes them from being a remove with pliers fit to still a good tight fit and so much easier to dry fit test your job I used to do the same thing to 10mmx75mm hardwood dowels when Iwas fixing table rails to the legs it makes the job so much easier.
you dont have to do them one at atime put say ten in and give it about 3mins but keep an eye on them because time can vary depending on your microwave power
-
3rd August 2006 09:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
How to make my Dual Cyclone - Dust Extractor
By Turbulance in forum DUST EXTRACTIONReplies: 17Last Post: 22nd November 2008, 08:38 AM -
Lie Neilsen Blades Won't Fit
By TrevorOwen in forum HAND TOOLS - UNPOWEREDReplies: 11Last Post: 18th September 2005, 06:00 PM -
WILL IT FIT, Please Help
By CustomStretch in forum BANDSAWN BOXESReplies: 0Last Post: 2nd June 2005, 12:44 PM -
Adaptor to fit Triton dust hose to Belt Sander
By silentC in forum TRITON / GMCReplies: 18Last Post: 18th October 2003, 09:10 AM