Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: festool diy mods
-
5th October 2013, 09:56 AM #1GOLD MEMBER
- Join Date
- Oct 2007
- Location
- vic clayton
- Posts
- 1,042
festool diy mods
I am making up a cabinet for the wife and needed to do some pin holes for the adjustable shelving so I modded the base of my OF1010. all it took was a 3/16th hole a shelving pin and a small piece of pine.
I use a spiral upcut bit for the hole making Its just a matter of making the first hole then fitting the pin and away you go. Picture 171.jpgPicture 167.jpgPicture 168.jpgPicture 169.jpgPicture 170.jpgSome people are like slinkies - not really good for anything, but they
bring a smile to your face when pushed down the stairs .
-
5th October 2013 09:56 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th October 2013, 11:00 AM #2
A lot cheaper than the LR32 system.
When I have required to make shelf holes, normally in a pre existing cupboard, so the board is vertical, I use a predrilled board as a template and drill away.
Move the board 3 times and all the holes are at the same level.
A boring job!
-
6th October 2013, 12:48 PM #3
Great mod fubar.
Similar Threads
-
Festool Drills cordless first festool purchase
By annehns in forum FESTOOL FORUMReplies: 6Last Post: 1st November 2012, 09:46 AM -
New Mods?
By Felder in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 70Last Post: 9th November 2006, 01:05 PM -
MK3 mods I've done
By zathras in forum TRITON / GMCReplies: 9Last Post: 7th October 2002, 10:24 PM