Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Festool Domino Miss-Alignment
-
7th June 2019, 04:22 PM #1Intermediate Member
- Join Date
- Mar 2009
- Location
- Windsor
- Posts
- 30
Festool Domino Miss-Alignment
Hi all,
Help needed with my Domino. For quite a few years now I have noticed that my machine does not mortice parallel to the fence. To overcome this I have had to put several layers of masking tape on one side of the fence. I am getting a bit sick and tired of having to keep replacing the tape. Does anyone know if there is anyway that I can adjust the fence or main body to remedy this. I have attached an image of two pieces of MDF that were morticed without the masking tape and hopefully you can see how the two pieces when fitted together are at an angle.
Thanks in advance
Darren
IMG_20190530_112457.jpgIMG_20190530_112425.jpgDomino.jpg
-
7th June 2019 04:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th June 2019, 04:51 PM #2SENIOR MEMBER
- Join Date
- Nov 2010
- Location
- Perth W.A
- Posts
- 720
Hi Darren, I have the Df700 which seem to have the identical fence and rail type assembly, there doesn't seem to be any obvious way of adjusting this on mine.
Maybe there is some adjust where gearbox assembly is mounted, there seem to be a lot of screws on mine so mybe there are some shims in there.
You could contact Festool service and ask but short of that you would need to machine some aluminium off the other side of the fence.
-
7th June 2019, 06:07 PM #3Senior Member
- Join Date
- Feb 2012
- Location
- Newcastle
- Posts
- 337
I would ask festool to fix it, for a precise, expensive tool like a domino I would just get it done right.
-
7th June 2019, 06:15 PM #4SENIOR MEMBER
- Join Date
- Nov 2010
- Location
- Perth W.A
- Posts
- 720
-
7th June 2019, 11:04 PM #5SENIOR MEMBER
- Join Date
- Aug 2012
- Location
- Gympie
- Posts
- 219
Hi Darren,
Some people have trouble with the fence racking in use. Best way around this is to buy a Seneca Domiplate. It is a fence that bolts on the bottom of the domino. The tool is then used upside down.
Ross
-
8th June 2019, 01:20 AM #6
Read these threads on the FOG:
Domino 700 Adjustment
Domino mortices not horizontal.Anyone seen this before?I still love the thing!
Bottom line: send the machine back to Festool.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
Similar Threads
-
N.S.W. Festool Domino DF 500 Q Plus Plus systainer of domino’s
By Phily in forum WOODWORK - Tools & MachineryReplies: 12Last Post: 28th December 2018, 11:12 PM -
Festool Domino
By shanesmith80 in forum WOODWORK - GENERALReplies: 3Last Post: 31st August 2016, 07:50 PM -
Festool Domino Look a Like
By simops in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 5Last Post: 13th July 2014, 02:49 PM -
Festool Domino 500 or 700
By RicB in forum FESTOOL FORUMReplies: 11Last Post: 27th October 2012, 11:07 PM