Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Festool Guide Rail Bag
-
20th August 2011, 09:51 PM #1
Festool Guide Rail Bag
Hi All
does anyone else have a problem with fitting there 1400mm rails into the guide rail bag.
and if i do squeeze them in it damages the rubber edge
any solutions?
Cheers Bryan
-
20th August 2011 09:51 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th August 2011, 09:58 PM #2GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
They are the absolute limit of what will fit in the bag. I find I have to put one in with the zip fully open, close the zip a bit, then carefully slide the second one in the other way around, so the channels are against the thin edge of the opposing guide.
All the accessory joiners & clamps go in a thin systainer that is clipped to the saw box, not the short pocket.
-
20th August 2011, 10:22 PM #3
i cant even get one rail in the top corner sticks out cant shut it
i think mine has shrunk
Bryan
-
21st August 2011, 10:43 PM #4
I have two 1400 rails, plus one 800 rail in my bag. They seem to fit in comfortably.
-
22nd August 2011, 08:52 AM #5Member
- Join Date
- Sep 2005
- Location
- sydney
- Posts
- 62
Mine sucked also, it came 'free' with a deal, I chucked it.
-
22nd August 2011, 10:39 AM #6Senior Member
- Join Date
- Jul 2007
- Location
- Pittsburgh, PA, USA
- Posts
- 106
-
23rd August 2011, 03:33 AM #7
No, all three rails are inside the main pocket. Bought in July, 2011.
-
23rd August 2011, 06:16 PM #8
well i wet my bag with some water. then i put a piece of mdf and reversed 2 irwin clamps so they will spread it. ill leave it fo a couple of days to dry.
cheers
Bryan
Similar Threads
-
Lusting after a Festool guide rail saw but can't afford one?
By ian in forum HAND TOOLS - POWEREDReplies: 20Last Post: 20th October 2011, 01:00 PM -
Guide Rail Bag
By lesmeyer in forum FESTOOL FORUMReplies: 2Last Post: 15th August 2009, 12:27 PM -
How fast to reposition the guide on the Festool circular saw guide system?
By Icestation2 in forum FESTOOL FORUMReplies: 12Last Post: 4th July 2009, 10:37 AM -
Makita / Festool guide rail clamps
By sidewz in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 0Last Post: 5th March 2009, 08:05 PM -
Simple mortice jig using Festool guide rail
By chris_hewett in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 7Last Post: 12th February 2005, 04:14 AM