Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Festool Kapex 120 not level
-
7th December 2013, 11:09 AM #1GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Festool Kapex 120 table not level
Hello, I have placed my Kapex 120 on a flat surface, and clamped a 700mm length of 3mm thick 50 x 50 aluminium angle to the table of the saw and against the fence, clamped either side of the blade, and measured the distance from the flat surface to the underside of the aluminium. On the left of the saw it measured 109 mm high, and on the right 110mm high.
I am in the process of making a 2 metre long mitre saw station, with the saw near one end, and need the table surface of the saw to be dead level.
Can anyone please advise how I might be able to do this?
I cannot get the rubber feet in each corner undone , either, they just turn as the Allen key placed in the cap screw is rotated. There seems to be no height adjustment with these feetregards,
Dengy
-
7th December 2013 11:09 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th December 2013, 09:06 PM #2GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
Shim the feet when the saw is in place would be my method, no need to make it more complicated than that.
CHRIS
-
8th December 2013, 09:12 AM #3
Shimming is the way to go. Also the aluminium angle and tabletop are not liekly to be "straight edge" perfect, so they could be wrong 0.5mm each and the KAPEX right. But regardless, shim to correct. Also consider locking down the KAPEX with the four bolt holes provided in the cast base. This could take out any level differences as well.
-
8th December 2013, 11:46 AM #4
...forget all that shimmy shammy stuff, it sounds serious so I strongly suggest you send it to me, an unauthorized festool repairer.
It sounds like your oscillating green capacitor is not level, and will need serious work. Shouldn't take any longer than 5 years to fix and test. Meanwhile I will send you a loaner(dewalt) to keep you cutting.
Cheers...
Jolly green guy
-
8th December 2013, 07:18 PM #5GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Many thanks for this kind offer Wolften, but I fixed the problem by bolting the four legs down, as suggested by nt900. The final clearance on both sides of the table was 109mm.
Can you please advise where I can find the oscillating green capacitor in case it needs replacement in future?regards,
Dengy
-
8th December 2013, 08:10 PM #6
...that's why I'm an unauthorized festool repairer, we need to keep a few things secretive, but, if you must know, send it up here, I'll mark the said OGC in red so you know where it is
-
8th December 2013, 10:04 PM #7GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Similar Threads
-
Festool Kapex KS-120 Oil Leak
By Col in forum FESTOOL FORUMReplies: 13Last Post: 12th December 2013, 10:11 AM -
Festool KAPEX KS 120 v. Makita LS1214
By Dengue in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 12Last Post: 25th September 2009, 12:31 PM -
Festool - Kapex
By tikiland in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 4Last Post: 5th October 2007, 05:31 AM -
FESTOOL KAPEX Coming Soon
By nt900 in forum ANNOUNCEMENTSReplies: 0Last Post: 17th June 2007, 07:44 PM