Thread: Festool Sander
15th September 2007, 01:38 PM #1
Ive got a ETS 150 3EQ sander had it about 6 years and not heavy use.
The last few days its become increasingly difficult to keep the velcro discs on. They will fly off as soon as I start.
I have been using Bosch discs for the last 12 months and it started with them so today swoped over to some other Aust. made Ive just got. but no difference.
Ive also just spoken to Anthony(?) at Ideal Tools and he suggested that the hook/loop could be different but how do I figure that out .
Any suggestions guys?I would love to grow my own food, but I can not find bacon seeds
15th September 2007 01:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Advertising world
15th September 2007, 01:42 PM #2
Is the hook pad on your machine clean, not worn down are they?
Try some Festool sanding discs and if they stay on, that would suggest that the other ones aren't compatible.Cheers
15th September 2007, 02:07 PM #3
Thanks DJ bummer is Ive a job supposed to be out Monday, we live 700 k away from Adelaide, mail service is cr**, and I'll have to order them in but from where ?
Shouldnt be worn down its only 5 years old and 2 years of that was in a box, and then only used rarely. Got it as a deal in lieu of overtime .......he he he saved both ways I didnt loose OT money in tax, company got tax concessions for extra tools
Last edited by Tonyz; 15th September 2007 at 02:11 PM. Reason: additional wordsI would love to grow my own food, but I can not find bacon seeds
15th September 2007, 03:52 PM #4
Heat is the enemy of the hook and loop as it wears down the pile quickly if overworked.
The other problem is if you were sanding at the time it came of you may not have been quick enough to lift the machine before it did quite a few revolutions on the timber wearing down the pile. Worn pile no grip on discs.
Once you do this then the coarser grades will not hang on as they get more grip on the timber than the hook does on the loop. You may get away using the finer grits for a little while but you usually need to replace the pad.
15th September 2007, 04:08 PM #5
Jim I think your bang on the money.
The new discs I got are Norton brand And I tried some 120 then some other brand that Ive had around for awhile these were 240 & 320 each
All of these stayed on for a short time but now nothing sticks.
Anothony from Ideal Tools is sending me a Festo disc but I think a new pad is in order.I would love to grow my own food, but I can not find bacon seeds
15th September 2007, 04:16 PM #6
Ive also been led to think that there are different 'grades/patterns/sizes' or whatever you call it to hook and loop stuff. If this is so how can I tell or discover what the difference between Festo tools and Norton paper is?
what a way to spend a Sat arvo.I would love to grow my own food, but I can not find bacon seeds
15th September 2007, 11:12 PM #7
i think for sure the pad has slipped off and you might not have been quick enough to pull it up and it has ruined the hook it shouldnt matter what sand paper you use
16th September 2007, 12:03 AM #8
It does sound like the sander base has worn, it follows the typical patten and I would think a new base will solve all problems. A lost pad and to slow on the lift was the killer for the last base on my poor old Bosch.
By felixe in forum HAND TOOLS - POWEREDReplies: 11Last Post: 23rd May 2007, 08:10 PM
By The Bird in forum FESTOOL FORUMReplies: 5Last Post: 1st May 2007, 10:02 AM
By PEN in forum FESTOOL FORUMReplies: 0Last Post: 5th February 2007, 09:15 PM
By warmtone in forum FESTOOL FORUMReplies: 5Last Post: 21st January 2005, 11:20 AM
By Mick4412 in forum HAND TOOLS - POWEREDReplies: 2Last Post: 10th February 2003, 07:58 PM