Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Guide Rail Bag
-
14th August 2009, 10:56 PM #1
Guide Rail Bag
I notice the fit for 2 1400 rails in the bag is a tight fit. Does anyone have any tips for storage in the bag to not cause warpage or any other damage? Such as putting them in back to back etc.
Regards
Les
-
14th August 2009 10:56 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
15th August 2009, 01:37 AM #2Senior Member
- Join Date
- Jul 2007
- Location
- Pittsburgh, PA, USA
- Posts
- 106
Les, I keep two 1400 mm rails in my rail bag all the time (several years) and I've not had any problems with warping. They won't fit back to back, at least not easily. The only issue I've had is with the splinterguards. What can happen is when you've moved a worn splinterguard there is a small gap between the rubber and the little metal lip. The fit in the bag is so tight the splinterguard can be pushed back up against that lip moving it from its place. This happen when the bag is kept stored on its side, this puts pressure on the splinterguard that it taking the weight of the rail. If stored on end I've not had this problem happen again. Let me if this make sense.
-
15th August 2009, 12:27 PM #3
Thanks Brice. Exactly the info that helps before I encounter the same problem. I will store on end as you suggest.
Regards
Les
Similar Threads
-
Lusting after a Festool guide rail saw but can't afford one?
By ian in forum HAND TOOLS - POWEREDReplies: 20Last Post: 20th October 2011, 01:00 PM -
OF1400 and the Guide Rail
By lesmeyer in forum FESTOOL FORUMReplies: 6Last Post: 20th April 2009, 08:21 PM -
Makita / Festool guide rail clamps
By sidewz in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 0Last Post: 5th March 2009, 08:05 PM -
MFT guide rail pivots, etc.
By Afro Boy in forum FESTOOL FORUMReplies: 0Last Post: 23rd January 2009, 08:38 PM -
guide rail
By Sokolic in forum FESTOOL FORUMReplies: 9Last Post: 15th September 2007, 12:36 AM