Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Midi motor won't start
-
8th March 2022, 07:59 PM #1
Midi motor won't start
Festool CTM MIDI E FS (576740) 1200W 15L M Class Dust Extractor
Mine is pretty much new and used very little so far.
All the lights come on using manual or Bluetooth.
But the motor won't start.
No beeping.
Tried new bag just in case.
Had a look at the filter.
I'll ring them tomorrow.
And sort a replacement if necessary.
Wondering if I'm missing something.
Any help would be greatly appreciated.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
8th March 2022 07:59 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th March 2022, 08:41 PM #2
I will be interested at what is happening too.
Recently mine did not start when I had a tool plugged in. Tool started but not the dust extractor so had dust every where. Not happy. Red light came on.
Still not sure why. Fix was turn off and turn back on again and hope it did not happen again.
-
9th March 2022, 06:27 AM #3GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,014
My CT36 refused to start a few months ago (about 2.5 years old) - turned out the control board needed replacing. All done under warranty for nothing (including post and return)
Similar Threads
-
Got the MIDI-1 wondering what I'm missing in the MIDI-2 - no specs
By barrysumpter in forum FESTOOL FORUMReplies: 7Last Post: 11th March 2022, 02:08 PM -
Using a Higher torque motor on Driver Board not rated for that motor.
By Sterob in forum CNC MachinesReplies: 4Last Post: 18th October 2017, 02:28 PM -
Looking for mini or midi lathe without motor for project (bicycle powered!)
By Zeeber in forum WOODTURNING - GENERALReplies: 2Last Post: 13th February 2016, 04:10 PM -
Is a motor start relay switch needed for a 3ph 2.8kw pump motor?
By Ben Dono in forum METALWORK FORUMReplies: 26Last Post: 14th August 2015, 02:38 PM -
Seeking Midi lathe advise - Teknatool Midi lathe V something else?
By Larks in forum GENERAL & SMALL MACHINERYReplies: 4Last Post: 21st July 2014, 09:33 PM