Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Qf 2200
-
20th July 2020, 08:13 PM #1Senior Member
- Join Date
- Jul 2019
- Location
- Box Hill
- Age
- 66
- Posts
- 186
Qf 2200
Has anyone by chance upgraded from some brand of 3hp router to the QF 2200 and no regrets. Considering the big price difference I’m curious if others have taken the plunge and shelled out the huge amount to buy one. I own a Scheer HM 18 which is simply unstoppable but a real pain to set up. I don’t need a QF 2200 at all. I just like them,however, they are seriously expensive compared to something like a Makita 3 hp router.
-
20th July 2020 08:13 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th July 2020, 09:55 PM #2SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
well, if you think about the resale value of the Festool its not that expensive then.
I have OF1010, and OF2200, OF2200 does everything 1010 cant do, anything bigger than OF2200 can handle, I use my spindle moulder.
I havnt used any other router though
If wood working is only a hobby, then I agree OF2200 is a tad expensive...SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
21st July 2020, 11:02 AM #3Senior Member
- Join Date
- Jul 2019
- Location
- Box Hill
- Age
- 66
- Posts
- 186
Thanks Albert, I was very recently in a store where they had a base plate kit in a sustainer for $695.00 it’s now being discussed if it was old stock or wrongly priced. Judging by the dust I would guess it was old stock so I’m waiting for a call back. Anyway thanks for replying. Like you I have a few routers and wouldn’t sell any of them. So glad you have a spindle Moulder as I have been looking for SCM 150...they are not common at all and as you know they have a very good top speed and tilting arbor. By chance do you have a power feeder on you spindle Moulder and if you do what reasons did you choose the one you did. Thanks for replying.
-
21st July 2020, 01:09 PM #4SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
The accessories on the OF2200 is as expensive as the router itself.
my current spindle moulder is a pain to setup and I dont touch it that often.
SCM makes very good spindle moulder, I was very tempted to import a second hand spindle moulder from Europe but I end up indent a new Ti145 with electro spindle, programmable, automated fence/tilt/height and side tenon table from SCM with local SCM agent.
I have a Comatic variable speed feeder, 2 good thing about the Comatic variable speed feeder is that you change speed by pressing a button, and you can change the feeder head from vertical to horizontal in under 10 seconds, one man, no heavy lifting.SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
21st July 2020, 03:09 PM #5Senior Member
- Join Date
- Jul 2019
- Location
- Box Hill
- Age
- 66
- Posts
- 186
Sounds a great system...expensive but great..that power feeder you have sounds like the ones I looked at online from Comatic. Roughly similar price to the QF2200 and the base plate system. The SCM 150 isn’t an easy find second hand in Aust so I can imagine in NZ it would even harder. And as I’m a backyard woodworker these days the spindle Moulder tooling as you would know can be really expensive.
-
22nd July 2020, 10:00 PM #6SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
yes it is expensive and how I looked at it is that I like wood working, this is my hobby and also generates income, therefore I decided to take the leap and put down some very serious money on the spindle moulder. The toolings are expensive but they often will last a lifetime. I have never regretted buying expensive machinery and I always regretted not getting it earlier, or bought cheaper machines.
SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
Similar Threads
-
QUEENSLAND Festool OF 2200 Router
By woodchopper in forum WOODWORK - Tools & MachineryReplies: 11Last Post: 25th March 2020, 10:33 PM -
2200 OF and CMS
By MBP in forum FESTOOL FORUMReplies: 8Last Post: 22nd June 2012, 01:55 AM -
2200 x 1100 outdoors table top.
By Pedro99 in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 7Last Post: 12th January 2012, 05:31 PM -
New OF 2200 Router in CMS
By nt900 in forum FESTOOL FORUMReplies: 12Last Post: 13th May 2008, 07:57 PM -
NEW OF 2200 festool router
By Bryan1982 in forum FESTOOL FORUMReplies: 7Last Post: 27th April 2008, 09:47 PM