Thanks: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Blade Suppliers
-
11th November 2016, 03:48 PM #1SENIOR MEMBER
- Join Date
- Dec 2008
- Location
- Hobart
- Posts
- 153
Blade Suppliers
Hi
I am looking for a supplier of a suitable blade for bandsaw boxes. After a bit of looking about I have settled on a 3/16 10 tooth per inch blade. I have contacted all of the Australian suppliers I can find on the internet and have virtually identical responses from them all - 1/4 is as small as you can get these days. I find that hard to believe. Does anyone have a supplier who can help - either Australian or overseas.
-
11th November 2016 03:48 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th November 2016, 04:05 PM #2
-
11th November 2016, 06:40 PM #3SENIOR MEMBER
- Join Date
- Dec 2008
- Location
- Hobart
- Posts
- 153
Yes I have. They did say to ring back on Monday to check but were fairly certain that 1/4 was the smallest they now stock.
-
11th November 2016, 08:30 PM #4SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Hervey Bay
- Posts
- 250
Hi Mike,
Try Amazon international shipping - 3/16 bandsaw blades.
If they don't have the length you want, buy a bigger one and have a saw doctor cut and braze it to size.
https://www.amazon.com/s/ref=nb_sb_n...+bandsaw+blade
Regards, Jeff
-
11th November 2016, 09:27 PM #5SENIOR MEMBER
- Join Date
- Dec 2008
- Location
- Hobart
- Posts
- 153
-
12th November 2016, 01:42 PM #6GOLD MEMBER
- Join Date
- Aug 2012
- Location
- Imbil
- Posts
- 1,167
I use a 1/8"14tpi blade from Peacocks saws in Brisbane and have had great results with them cutting up to 90mm thick hardwood boxes.
Regards Rod.Rod Gilbert.
-
13th November 2016, 08:14 PM #7
Did you try McDiven Saws in Williamstown in Victoria 03 93971458. They specialise in bandsaw blades. (03) 9397-1458
-
14th November 2016, 05:23 PM #8SENIOR MEMBER
- Join Date
- Dec 2008
- Location
- Hobart
- Posts
- 153
Thanks Rod and Treecycle. I will keep them in mind for when I next need a blade.
-
19th November 2016, 09:00 PM #9
Just found this site too and they have blades less than 1/4". You don't say how long yours is so can't say if they have your particular one.
-
20th November 2016, 09:31 PM #10
-
21st November 2016, 07:37 AM #11SENIOR MEMBER
- Join Date
- Dec 2008
- Location
- Hobart
- Posts
- 153
-
21st November 2016, 10:39 PM #12Novice
- Join Date
- Nov 2016
- Location
- Briabane
- Posts
- 10
We actually have 1/8" wide blades in several length like 1085mm,1400mm,1512mm and 2375mm. But we don't do custom length. If there is anything I can help, please contact me at [email protected] Cheers!
Similar Threads
-
bandsaw blade suppliers in Brissy?
By Corgan in forum METALWORK FORUMReplies: 6Last Post: 11th September 2011, 06:30 PM -
Table Saw Blade - Flai u Blade
By Arry in forum WOODWORK - GENERALReplies: 2Last Post: 8th May 2011, 12:27 AM -
Blade/Blade supplier recommendations
By Androo in forum SCROLLERS FORUMReplies: 9Last Post: 23rd July 2006, 12:10 PM -
Miterfold-Router Blade - V-Blade
By brbjurgen in forum WOODWORK - GENERALReplies: 6Last Post: 23rd November 2004, 10:50 PM