Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Candlebox
-
31st October 2012, 04:58 PM #1Senior Member
- Join Date
- May 2012
- Location
- Chewton Vic.
- Posts
- 208
Candlebox
Hi all, If you keep the candle lit, they can't nick your jewellery
The vase is pine and the insert is cypress pine, Cheers Harry
P1060488.jpg
P1060474.jpgP1060475.jpgP1060477.jpgP1060478.jpgP1060482.jpg
-
31st October 2012 04:58 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st November 2012, 12:28 AM #2
I'm very impressed. You must be proud to yourself because you did a wonderful candlebox there man.
-
1st November 2012, 07:11 PM #3
what was the sequence of the making this round bandsawn box?
bytheway like your originality, well done!Tony Ward
Now a power carver and living the dream.
-
1st November 2012, 08:16 PM #4Senior Member
- Join Date
- May 2012
- Location
- Chewton Vic.
- Posts
- 208
Thank you for the comments. The sequence is something like this.
First make the outside vase.
Drill a hole in the vase with a Forstner bit, about 42mm
Turn the inside box wood down to 42mm or till it slides in the vase, cut to length
Turn the top of the box to fit a candle thingy
Turn the inside of the top to make a knob so you can grab the box to take it out of the vase
Take a slice off the bottom of the box
Take a slice off the top of the box below the top inside knob
Take a slice off the back of the box
Cut out draw
Cut and assemble drawer as normal
Glue top, back and bottom slices back to the box
Some flocking in the drawer, and you’re done. Cheers.
-
2nd November 2012, 06:48 AM #5
The procedures sound easy but surely it's not that easy to make it .
-
7th November 2012, 01:56 PM #6Member
- Join Date
- Nov 2010
- Location
- Australia, VIC, Cranbourne
- Posts
- 90
hah very clever another meaning to thieves I burnt my fingers once.