Another question

**Dalboy** · 11th September 2014, 10:44 AM

When you cut out the draws if you insert them they sit on the bottom of the hole. How do you all get the draw sit centrally in the draw opening.

**John T** · 11th September 2014, 11:01 PM

HI dalboy,
When i make my bs boxes to even the spacings around the draws, i use thin pre pasted felt the same colour as the flock you use inside the draws, and i also cut the same felt about 1 inch square to the rear of the draw. Some also use thin pieces of wood glued on the base of the draw. hope this helps regards john.

**Dalboy** · 12th September 2014, 05:54 AM

Originally Posted by John T

HI dalboy,
When i make my bs boxes to even the spacings around the draws, i use thin pre pasted felt the same colour as the flock you use inside the draws, and i also cut the same felt about 1 inch square to the rear of the draw. Some also use thin pieces of wood glued on the base of the draw. hope this helps regards john.

Thank you for that I like the idea of the thin wooden runners on the bottom of the draw especially as I have plenty of the same wood I am making my first box from. Will post as soon as I have completed it.

Thread: Another question

Thread Tools

Search Thread

Another question

bandsaw boxes

Similar Threads

Watering question....possible blonde question :D

Just a question please!

Dumb question alert:- Salt and pepper question again

question?

An ROS question sander question for the box makers here

Tags for this Thread

Posting Permissions