Thread: Request for Bombay Chest Jewelry Box Template Plan from The WoodWorking Channel

For the regluing after bandsawing:
Medium or Thick Viscosity Cyanoacrylate (C.A.) glue
and Curing Accelerator.

(Don't know why I kept getting confused with the name. lol)

At a slow count of 10 the glue starts to set, by 15, it is solid.

Hot Stuff:
http://www.carbatec.com.au/store/ind...11_11610_11620

Accelerate and Control Tips:
http://www.carbatec.com.au/store/ind...11_11610_11630

--------

Sam Maloof mentioned TiteBond II glue or TiteBond III glue as well.
Specifically NOT Gorilla glue.
For numerous reasons including how it stains his hands.
Which is something I've posted about here before.
It lasts for weeks. And makes me look like I can't stay clean.

The article mentions Polyurethane glue and a misting bottle to moisten all glue surfaces first.
But the internet states Gorilla Glue is Polyurethane.

I recall the outdoor glue I used bubbling over like the photos in the article.
My fear is that it won't dry clear and leave yellow streaks between the work pieces.

TiteBond:
http://www.routerforums.com/printthread.php?t=353

TiteBond Product Line - II is premium - III is Ultimate
http://www.carbatec.com.au/store/ind...yword=titebond

2665mm 3/16" (5mm)
Premium Bandsaw Blade
to fit the BANDSAW RISER KIT FOR 14 INCH BANDSAWS

Doubles depth of cut on many 14" bandsaws from 6"/150mm to 12"/300mm.

http://www.gtp.com.au/cgi-bin/icomme...=495&id=2665_6

Anyone have a contact for 'Premium' Bandsaw Blades here in australia?

Try this:
http://www.timbecon.com.au/products/...ies-314_0.aspx

Thanks Hickory,
An excellent online resource.

I bit the bulllet and made my way down to Carba-Tec's new location.
Decent look around and decent stock.
Much bigger and not so crowded. i.e. easier to move around in.
A definite improvement.

Although they did bring the exhaust fumes with them. lol


I spent exactly $100 on:

1) Titebond II - 1/2 the price of Titebond III
2) Hot Stuff - Green - Extreme Filler
3) Accellerator - NCF Mild
4) Bandsaw Blade - "The best you're gonna get in Australia" - 3mm - 14 teeth - 1/8"
..............................Hopefully the 3/4 hp will handle the cut.

hth