Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
Thread: vertical
-
25th November 2004, 06:52 PM #16
Sorry , didn't clarify that I actually think that the saw is out of square on the left right axis cause mine was.
-
25th November 2004 06:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
3rd February 2005, 01:34 AM #17
Yep I know what you mean
I have the same problems with my scroll saw.
I replace the table with one that has a mountain in the middle making it easier to cut warped peices of wood, but when it comes to setting the table it is near impossible to get it right.
I found that doing test cuts and checking the squareness of the cut was the only way of approximating the angle the table should be at, sadly it does depend on how I am holding the timber at the blade so not every cut I make is ever going to be the right angle .. excuse the pun