Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Veneer advice
-
6th April 2008, 04:49 PM #1Novice
- Join Date
- Apr 2006
- Location
- Perth, WA
- Posts
- 16
Veneer advice
Veneer advice,
Hello all,
I am building some open baffle speakers from marine ply, to match the rest of the house i tried staining them but dont like the colour, i have given them a quick sand back and would like to veneer them, i have a couple of questions on the difficulty though... The pics show some of the edges i am concerened will be very difficult to veneer, any advice would be appreciated.
-
6th April 2008 04:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th April 2008, 01:44 PM #2
i would iron the veneer on in that situation.i have successfully done it in the past.dont use too much pva.just get the iron hot,brown paper over the veneer & just do a little at a time.have a metal rule cold so that you can cool the veneer down a bit after ironing.
-
7th April 2008, 10:23 PM #3Novice
- Join Date
- Apr 2006
- Location
- Perth, WA
- Posts
- 16
Thanks Paul,
wil give it a shot..
Luke
Similar Threads
-
Beginner making car console. Veneer advice
By rrrestore in forum WOODWORK - GENERALReplies: 2Last Post: 31st March 2008, 08:46 PM -
Advice needed - timber veneer? Plywood? Sydney
By leetee03 in forum TIMBERReplies: 7Last Post: 10th March 2008, 09:51 PM -
Veneer
By DIY DAN in forum WOODWORK - GENERALReplies: 2Last Post: 29th August 2007, 01:48 AM -
Veneer
By Marcus Vernon in forum TIMBERReplies: 0Last Post: 4th August 2005, 06:20 PM -
veneer
By GC in forum TIMBERReplies: 3Last Post: 29th May 2003, 11:18 PM