Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: 19mm shank hole cutter adaptor
-
17th February 2015, 04:31 PM #1Intermediate Member
- Join Date
- Feb 2013
- Location
- Melbourne
- Posts
- 31
19mm shank hole cutter adaptor
Hello Folks, looking to run some hole saws, the ones with 19mm shanks and 2 flats at right angles. Looked around without success for an adaptor : hole saw socket to plain shank, for use in ER collets on a mill. I'll make them if need be, anyone seen something off the shelf thanks? regards,
-
17th February 2015 04:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th February 2015, 07:48 AM #2Intermediate Member
- Join Date
- Feb 2013
- Location
- Melbourne
- Posts
- 31
To answer my own question, I checked Google again today with the same search words and first up found adaptors on the Dutch Fein site, its almost like Google went away and had a think about it in the meantime.
The shank of the locally available lower priced cutters is called 19mm 3/4" Weldon, and this local Fein to Weldon adaptor looks sufficiently cylindrical to hold in a collet. regards.
http://www.qctools.com.au/adapter-fe...nweldon-201263
Similar Threads
-
Weldon Shank
By Marc in forum METALWORK FORUMReplies: 3Last Post: 25th November 2014, 02:44 PM -
Min Shank Length
By HeadScratcher in forum ROUTING FORUMReplies: 8Last Post: 10th May 2012, 03:47 PM -
Screw in milling cutter adaptor
By Stustoys in forum METALWORK FORUMReplies: 8Last Post: 15th August 2010, 08:11 AM -
Drilling large hole over small hole or vice-versa
By niki in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 28Last Post: 2nd November 2007, 08:32 PM -
Cheap Hole Cutter at Bunnings
By chrisp in forum HAND TOOLS - POWEREDReplies: 0Last Post: 23rd May 2006, 12:30 PM