Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: 350mm rule
-
28th June 2020, 06:00 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
350mm rule
Gday All. I hope everyone has had a good weekend.
I promised another forum member I'd send him a bit of carbide to make a carbide scraper with (will try and post tomorrow Ed)
Whilst I was looking through various boxes for the carbide I came across this.
350mm rule big.jpg
Something else I have forgotten where (and when) I got it from (and forgotten I had) I had some old newspaper (late 1988) in the bottom of the box and this rule had somehow managed to work its way under the paper so probably been there all that time.
Looks like it hasn't been used as it was still in a plastic bag. Probably for a machine. The good thing is its 350mm long.
How many times have you been making something that's been just slightly longer than 305mm? I enlarged the hole in one end and now it's hanging on the wall with my 150, 305 & 600 rules.
Almost as good as getting a new tool in the mail.
woo hoo
Peter
Attached Images
- 350mm rule big.jpg (43.9 KB)
Read the full thread at metalworkforums.com...
-
28th June 2020 06:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
QUEENSLAND Swiss made 350mm diameter Velcro backed sanding disks (for disc sander)
By Ben + in forum WOODWORK - Tools & MachineryReplies: 3Last Post: 8th March 2020, 09:05 PM -
Made a 350mm Disc sander
By Ed.. in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 5Last Post: 20th October 2016, 06:24 PM -
My new 350mm tenon saw
By IanW in forum Saws- handmadeReplies: 12Last Post: 5th December 2014, 08:14 PM