Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Advance lathe
-
10th November 2014, 10:30 AM #1
Advance lathe
Does anyone have a manual or instructions for an advance lathe?
…..Live a Quiet Life & Work with your Hands
-
10th November 2014 10:30 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th November 2014, 05:50 PM #2
My son has an Advance lathe. I have a few web pages I saved a few years ago. No manual. Is yours plain bearings or taper roller bearings? Although he has left home - the lathe is still in my workshop (sigh!). I will try to work out where I found the web pages, I am sure some were from Tony's site. http://www.lathes.co.uk/advance/ Cheers, Findlay.
-
10th November 2014, 06:46 PM #3
No idea on the bearings as yet.
…..Live a Quiet Life & Work with your Hands
-
10th November 2014, 06:50 PM #4Senior Member
- Join Date
- Nov 2008
- Location
- Qld. Australia
- Posts
- 417
I have a yet to be put back together (tapered bearing headstock) Advance. No manual that I have ever seen. Was a reasonably good website here on the Advance but it disappeared a few years ago. http://www.titaniumstudios.com/tooljunkie/advance.html There is also this - http://home.iprimus.com.au/stevor/Lathe.htm
Nev.
-
10th November 2014, 08:17 PM #5
The titanium studios page is still around - URL has changed a bit.
http://archives.dcemulation.org/www....e/advance.html
Also found another page (new to me)
http://blog.open-designer.org/?p=31
The one I have access to is a roller bearing headstock. I may have some notes from work we did on it.
Findlay.
Similar Threads
-
apologies in advance... WIP
By fletty in forum WOODWORK - GENERALReplies: 31Last Post: 7th September 2012, 11:09 PM -
Advance Lathes
By SurfinNev in forum METALWORK FORUMReplies: 7Last Post: 16th May 2012, 09:36 AM -
Hi From Victoria . I need some parts for my Advance lathe
By thorens in forum METALWORK FORUMReplies: 4Last Post: 2nd August 2011, 11:52 PM -
Apologies in advance...
By craigb in forum WOODWORK - GENERALReplies: 0Last Post: 24th November 2004, 02:51 PM