Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
4th September 2019, 02:22 AM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,431
Advice wanted on fixing a brass door threshold plate
I am replacing an old wood and plastic threshold with a brass one. The brass plate is 1.5mm thick, 1250mm wide, 150mm deep with a right angle 65mm down over the (concrete) step.
Can anyone advise on how to choose suitable fixing positions and distances to screw it in place? The doorstep is down into a covered porch so water ingress in screw holes is not an issue.
Thanks
Read the full thread at metalworkforums.com...
-
4th September 2019 02:22 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Imperial Brass Plate
By hilux in forum METALWORK FORUMReplies: 4Last Post: 27th November 2014, 10:04 AM -
[Canberra] Help Wanted! Drilling 20mm Holes In Brass Plate
By Morbius in forum METALWORK FORUMReplies: 3Last Post: 16th August 2013, 08:44 PM -
Rolling brass plate
By SHIPPERS in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 3Last Post: 25th October 2009, 01:29 PM