Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 39
Thread: AL340 (maybe) with broken saddle
-
13th April 2015, 04:05 PM #1SENIOR MEMBER
- Join Date
- Sep 2014
- Location
- Australia
- Posts
- 660
AL340 (maybe) with broken saddle
So I may have the chance to get my hands on a lathe that has been knocked over. There is a few broken bits that could be easily fabricated on my fathers mill and lathe, but the saddle is cracked where it sits on the bed. The cost for it - $0.
I am not sure if its an AL340, and wont know till I get a chance to get a look at it. Does anyone know if its possible to get a new saddle for these chinese lathes? Where would I even start looking for one?
If it cant be fixed, I will rat it for parts and send the rest off to the scrap merchants, so all that is lost is a little time and effort.
-
13th April 2015 04:05 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th April 2015, 05:51 PM #2
Talk to Hare & Forbes as the importers (if it is an AL340)
Perhaps post pictures once you get to see it and the collective wisdom on the forum may come up with a "cunning plan"
-
13th April 2015, 07:36 PM #3GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
As you have access to a mill and lathe, if you can't get one, why not fabricate it or get a lump of cast and machine it!
Kryn
-
13th April 2015, 07:39 PM #4SENIOR MEMBER
- Join Date
- Sep 2014
- Location
- Australia
- Posts
- 660
I just had a good look at the photo's, and I dont think its an AL340 as suggested. Here are the pics, the first one is not very good.
-
13th April 2015, 08:32 PM #5Senior Member
- Join Date
- Apr 2008
- Location
- Perth
- Posts
- 289
Al340 = tlc340
Hello
The TLC340A lathe was originally sold by Heerless, before being consumed by H&F. I have such a lathe. Will take pics of the area that is damaged on your machine. I bought mine back in 2003 at a reduced cost from $6000 down to $4000. H&F dont carry that model now.
DD
-
13th April 2015, 09:49 PM #6GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Would it be possible to bolt the 2 parts together, using a bolt on each side where there is a section on the V, I know it will be close to the other bolts, but it could be a save????
Kryn
-
13th April 2015, 10:47 PM #7SENIOR MEMBER
- Join Date
- Sep 2014
- Location
- Australia
- Posts
- 660
Ahh thanks for that. I wonder if there is a similar model. If i get it, I guess i can pull it down and measure it all up and see if one of the current H&F machines has a similar part.
Not sure. Still waiting to hear back to see if its still available. If it is, I will grab it and pull it down and see if it can be salvaged.
-
13th April 2015, 11:04 PM #8GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
How badly do you want a lathe and how much do you want to spend/learn along the way?
Even if you can buy a spare there will be some work fitting it.
I've seen a guy on the net weld up a badly broken apron with silicon bronze MIG
I guess anything is possible
Stuart
-
13th April 2015, 11:42 PM #9SENIOR MEMBER
- Join Date
- Sep 2014
- Location
- Australia
- Posts
- 660
-
14th April 2015, 10:10 AM #10Senior Member
- Join Date
- Apr 2008
- Location
- Perth
- Posts
- 289
Lathe
Cant be that hard to repair, its free for starters, that has to be a good thing. In your photos, I see that there are a few knobs missing, I can supply you pics of what goes where, knobs can be bought from H&F. My lathe is single phase model, they also came out as a 3 phase model, identical looks.
DD
-
14th April 2015, 11:24 AM #11GOLD MEMBER
- Join Date
- Aug 2011
- Location
- Melbourne
- Posts
- 2,951
Mate, it's free! Don't look a gift horse….
Knobs are on ebay for $2 including delivery. As for the saddle, strip it down and go from there. Whats the worst that can happen? Decide you can't repair it, strip down useful parts to give away/sell and send the rest to scrap. You will at least recoup your money. When things like this are free, I generally grab it AND then decide what to do with it!
If you do find a replacement saddle, it may still need to be tweaked to get it to fit nice.
SimonGirl, I don't wanna know about your mild-mannered alter ego or anything like that." I mean, you tell me you're, uh, super-mega-ultra-lightning babe? That's all right with me. I'm good. I'm good.
-
14th April 2015, 11:29 AM #12GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Define hard?
Pearo
Whether you get a new part* or weld** up the old one, you'll then need to scrape the carriage ways to the bed and likely the cross-silde ways. After that the rest will be easy.
Nothing wrong with having a crack at it(I'm pretty sure I would, but I can be a little pig headed), not like you can make it any worse. I'm just trying to let you know that*** there will most likely be a lot of time involved and possibly a large expense with no guarantee of success. Though a free lathe would be a great result(and you'd learn a lot along the way. Hey even if you fail you'll have learnt something).
So good luck!
Stuart
*I dont like your chances
**an interesting project in itself, which would be my biggest worry
***depending on the skills you'll need to pick up and the tool you have. I assume you have neither.(again not saying thats a bad thing)
p.s. a keep look at your threads would seem to say you are more a woodie? Do you have a wood turning lathe? Maybe if the carriage repair doesn't work out you have the makings of a heavy duty wood latheLast edited by Stustoys; 14th April 2015 at 11:35 AM. Reason: p.s.
-
14th April 2015, 11:59 AM #13SENIOR MEMBER
- Join Date
- Sep 2014
- Location
- Australia
- Posts
- 660
My old man is a retired tool maker / engineer and has the skills. I also have 2 good friends, one who owns a machine shop and the other works in a machine shop, so I will be relying heavily on them. Funny you should mention turning it into a wood lathe if it cant be fixed, as my father said the exact same thing!!
FWIW, I do have some skills in metal fab, done a bit of it over the years. To be honest, I am probably more competent working with metal than I am with wood. I have been chasing a lathe (was going to purchase a new AL320) for various jobs I do all the time. Scoring one for free would just be a bonus.
-
14th April 2015, 12:29 PM #14GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
So when do you get it home?
Stuart
-
14th April 2015, 12:32 PM #15SENIOR MEMBER
- Join Date
- Sep 2014
- Location
- Australia
- Posts
- 660
Similar Threads
-
Need a 38 tooth change gear for Hafco AL340 lathe
By bob ward in forum METALWORK FORUMReplies: 4Last Post: 15th January 2015, 03:30 PM -
Technical Specification of AL340
By oz94 in forum METALWORK FORUMReplies: 25Last Post: 4th December 2014, 08:44 AM -
Back in the saddle
By Grumpy John in forum WOODTURNING - GENERALReplies: 21Last Post: 7th March 2010, 09:13 PM -
Saddle Square
By derekcohen in forum HAND TOOLS - UNPOWEREDReplies: 9Last Post: 9th September 2007, 09:43 PM -
broken plane, broken heart
By fletty in forum HAND TOOLS - UNPOWEREDReplies: 17Last Post: 15th July 2007, 01:55 PM