Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: AL50 G Hafco
-
19th October 2014, 10:50 AM #1New Member
- Join Date
- Jul 2014
- Location
- Australia
- Posts
- 9
AL250 G Hafco
Hi all , I am in need of another small lathe, just looking about and noticed the Hafco AL50G, anyone have one or any info on this machine , cheers Mark.
Last edited by Holmatas; 19th October 2014 at 08:54 PM. Reason: Model Mistake
-
19th October 2014 10:50 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th October 2014, 01:17 PM #2Novice
- Join Date
- May 2012
- Location
- Australia
- Posts
- 24
Instruction manual is still available on the Hare and Forbes web site.
http://images.machineryhouse.com.au/...n%20Manual.pdf
ORDER CODE
L157
Model
AL-50GA
Digital Readout System Fitted
Optional
Quick Change Toolpost Fitted
Optional
Tool Height To Suit
10mm
Distance Between Centres
500mm
Swing Over Bed
230mm
Swing Over Cross-slide
130mm
Centre Height
115mm
Spindle Bore
20mm
Spindle Nose Size or Type
Threaded
Bed Width
115mm
Headstock Spindle Taper
3MT
Tailstock Taper
2MT
Cross Slide Travel
115mm
Compound Slide Travel
50mm
Leadscrew
Imperial
Longitudinal Feed Range (Z-Axis)
0.1 - 0.2mm/rev
Metric Thread Steps & Pitch Range
11 (0.5 - 3mm)
Imperial Thread Steps & TPI Range
27 (8 - 56tpi)
3 Jaw Chuck Diameter
100mm
4 Jaw Chuck Diameter
190mm
Spindle Steps / Speed Range
6 (100 - 1800rpm)
Motor Power
0.55kW / 0.75hp
Voltage
240V
Weight (nett)
105kg
-
19th October 2014, 02:06 PM #3New Member
- Join Date
- Jul 2014
- Location
- Australia
- Posts
- 9
This is the lathe I have now, AL50 G is a gear driven lathe, cheers.
-
19th October 2014, 05:41 PM #4
One of our members may have a 9x20 in electronic variable speed model for sale.
If interested send me a PM and I will put you in touch with him.
-
19th October 2014, 08:23 PM #5New Member
- Join Date
- Jul 2014
- Location
- Australia
- Posts
- 9
Sorry
Sorry guys , my mistake , i ment to ask about the AL 250 G , not the 50 G ! i have a Al 50 GA at present and wish to upgrade to the 250 G , Maybe , was just wanting to know if anyone had info good or bad on this machine , cheers Mark..
-
20th October 2014, 11:28 AM #6
Search it via Google,
https://www.google.com.au/search?q=A...forums&spell=1
-
20th October 2014, 11:58 AM #7
Don't know what you searched on but I put al250 in the search box at the top rh corner of the screen and got 7 hits, all relevant.
Quite often people make the mistake of putting too much in the search criteria.
The forum search function works quite well, except for searches on 3 characters.
If you need to do that, use Google and limit your search to this forum:
xyz site:woodworkforums.com
Similar Threads
-
HAFCO wl-18? Should i buy?
By SquidLYF in forum WOODTURNING - GENERALReplies: 31Last Post: 2nd November 2013, 10:36 PM -
H&F AL50 Metal Lathe V Belts
By gngh in forum METALWORK FORUMReplies: 3Last Post: 3rd August 2009, 09:06 PM -
Hafco
By BigStick in forum METALWORK FORUMReplies: 6Last Post: 26th August 2008, 11:53 AM -
Which lathe to buy AL50-A or AL50-GA?
By Jim Ferrous in forum METALWORK FORUMReplies: 3Last Post: 12th September 2006, 10:52 PM