Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 81
-
30th March 2013, 10:34 PM #1Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
It's the great big bandsaw clamp givaway thread..
RC has been busy slaving his #### off in the workshop just for everyone here, making as the thread title says, bandsaw clamps... And not just making them, but giving them away, no questions asked, no tricks, no nothing, just plain unadulterated free.. I do not care if you are green, blue, pink or even if your name is Greg Q, if you are one of the first fourteen people to put your hands up and have a valid
credit cardaddress you will receive one completely free of charge...
So what are bandsaw clamps I hear you say, simply little clamps you can use to assist holding very short stock in the bandsaw so you can cut it off... And probably a thousand other uses as well all around the home...
And as an added bonus, they come with free flight rust on one side
Stocks are limited on this once in a lifetime opportunity....
So post here, then send me a PM with your address. Remember there are only 14 to give away...
clamps are limited to one per address...no liability given if your wife/partner throws a clamp at you causing you injury after you receive it, in fact no liability to me at all for all clamp related injuries... clamps with a concrete warranty, when they are off my concrete the warranty expires.Light red, the colour of choice for the discerning man.
-
30th March 2013 10:34 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th March 2013, 10:42 PM #2SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Ballarat
- Age
- 65
- Posts
- 2,659
Gotta have one of those .RC.
PM sent
Phil
-
30th March 2013, 10:48 PM #3
I'd like one please, mister.Thanks for the generous off Richard! PM sent.
PS: how did you come up with the design - and how did you make them?Cheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
-
30th March 2013, 10:50 PM #4
Would love one R.C
Will send a PM
-
30th March 2013, 10:52 PM #5SENIOR MEMBER
- Join Date
- Dec 2007
- Location
- Gold Coast
- Age
- 63
- Posts
- 847
pick me, pick me.
PM sent.
I know it's a big ask, but can I have one with flight rust on the right hand side ?
(If it's on the left hand side, every time I use it, I'll see the flight rust.)
-
30th March 2013, 10:53 PM #6
Ooh, I'd love one of those, never seen flight rust before
PM sent.
-
30th March 2013, 10:56 PM #7
Is there a free steak knife too? Can it cut through a boot and then a tomato?
Good on ya R.C,i'll take since i'm this ll close to hitting the buy it now button on a BS-5S.......1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
30th March 2013, 11:14 PM #8Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
I'd like one too please.
PM sent.
Peter.
-
30th March 2013, 11:41 PM #9
I knew I stayed up for a reason. Could I have one please Mr RC. You know I am an RC too. No not arsey. RC. Well you know. Very generous of you I will PM you with my details
Just do it!
Kind regards Rod
-
30th March 2013, 11:54 PM #10GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Yes please Mr RC
Do they come with instructions?
PM on the way shortly
Thank you
Stuart
-
30th March 2013, 11:57 PM #11
Nice One .RC. If I had a bandsaw, I'd definately want one, might even change my name to GQ, nonetheless I applaud the generous gesture
Regards
Ray
Fixed smilie..
-
31st March 2013, 01:13 AM #12Senior Member
- Join Date
- Jun 2011
- Location
- Adelaide
- Age
- 27
- Posts
- 249
Great work RC look really nice!
You could possibly make a small buisness from these maybe?
Pm sent
Cooper
-
31st March 2013, 01:24 AM #13
Those Beaut Clamps
Hi RC,
I had a bit of a count, & I think I'm in that 14.
Yes Please to 1 Clamp.
I think that is a very generous offer from you.
Thanks Again.
PM Sent.Regards,
issatree.
Have Lathe, Wood Travel.
-
31st March 2013, 07:24 AM #14Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
Well I believe that is 12 down, 2 left...
Suppose you are wondering why am I doing this... Has RC gone a bit looney (or loonier as some might think)
Well the story behind this event is I was needing some chromed 3/8 rod for my surface grinder and in this country the only supplier that could be found wanted something like $300 a metre for it... I made a post over on PM forum asking for help... Got a reply and a PM member offered to send me some 3/8 chromed rod over as he had some on hand...
When the package arrived it contained the rod and a bandsaw clamp... He did not want any payment or anything and said it was just something he wanted to do and wanted me to make payment forward to other people.... He has also been making bandsaw clamps and has been giving them away to people in the US.. So this is my way of paying him for his generosity... He knows about about it and is quite happy to see this done..Light red, the colour of choice for the discerning man.
-
31st March 2013, 07:52 AM #15
Hey, my name is Greg Q. Can I have a clamp too please?
It's all part of the service here at The House of Pain™
Similar Threads
-
Huon Pine Book Case made by my Great, Great, Great Grandfather
By Phil Spencer in forum WOODWORK PICSReplies: 19Last Post: 22nd November 2011, 09:31 AM -
Great Besey Clamp Order 2009
By martink in forum HAND TOOLS - UNPOWEREDReplies: 421Last Post: 14th March 2010, 10:47 PM -
The Great Bessy Clamp Order 2007
By martink in forum HAND TOOLS - UNPOWEREDReplies: 496Last Post: 27th December 2007, 10:55 PM -
Re The GREAT Bessey Clamp Buy
By Bob38S in forum WOODWORK - GENERALReplies: 2Last Post: 2nd December 2007, 11:55 AM -
The Great Lee Valley Clamp Order of Ought Five
By TassieKiwi in forum WOODWORK - GENERALReplies: 8Last Post: 11th February 2005, 10:01 PM