Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2008
    Location
    Townsville, Nth Qld
    Posts
    4,236

    Default BBQ cast iron plate for sharpening?

    hi, I am looking at getting an old cast iron BBQ plate 10mm thick and cutting it into rectangles 8" x 3" to use as a sharpening plate with diamond paste after getting them machined and flattened

    Can anyone please advise on whethere a plate like this would be suitable for this purpose, considering the annealing, whatever, that could come from exposure to a flame on the one side?
    regards,

    Dengy

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Oct 2011
    Location
    Adelaide
    Age
    59
    Posts
    3,149

    Default

    You're effectively making up a lapping plate (or a hone). They are normally much thicker for dimensional stability - the amount you would be removing is from the tool is very slight so with a thin plate deflections from being on an uneven surface or poorly supported start to become important.

    Michael

  4. #3
    Join Date
    Jun 2008
    Location
    Victoria, Australia
    Age
    74
    Posts
    6,132

    Default

    Hi Dengue,

    Depends how flat you want it. This discussion comes up from time to time, If the cast iron is rigid enough to stay flat then you could surface grind it, and then scrape it flat against a surface plate.. but if it's just 1/4" thick then it's going to warp and flex all over the place.

    If you want to make a cast iron lapping plate, ( the type with grooves ) and it was fairly small, (say less than 6 inches or so) I think it would be ok.

    Mill the grooves first, then surface grind it.

    Ray

    EDIT... I got interrupted while typing a reply, so I crossposted... but I see Michael is saying pretty much the same thing.

  5. #4
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    10,810

    Default

    Hi Dengue

    You could use the soles of old/broken cast iron hand planes ...



    Link: http://www.inthewoodshop.com/Woodwor...mondpaste.html

    Regards from Perth

    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.

  6. #5
    Join Date
    Oct 2012
    Location
    Australia
    Posts
    765

    Default

    Dengue, The BBQ does not get hot enough to do anything interesting to the metallurgy of the iron. if you want fully annealed cast iron you need to get it hotter much hotter, glowing bright yellow hot, and hold it there for a good few minutes and then letting it cool very very slowly. If you think you are up for that I'll post the full process specs.but..... that being said...As long as it is flat and is softer than what you are trying to hone and will hold the diamond particles you are good to go, the rest is mostly preference and refinements. The hardest part is getting it flat and keeping it flat (not distorting on you), and by flat I mean proper flat.Cast Iron is a great materiel, annealed grey cast iron would be at the top of my list, due to is slipperiness with steel, nice and soft to ready take the diamond particles, dimensionally stable and easy to work. small Thin circular groves help to keep the removed materiel for clogging up your plate and let you work in any direction. I would go a thick as you can get as it helps stop distortions and keeps the plate from moving around while you are working your edges. A cheap supply thick slabs 45mm+ of cast iron can be tractor weights, but they will need to be de skinned to get into its soft core. -Lates

Similar Threads

  1. Machining a Cast Iron back plate
    By Dingo Dog in forum METALWORK FORUM
    Replies: 15
    Last Post: 16th September 2012, 07:40 PM
  2. Cast iron for diamond paste plate
    By derekcohen in forum SHARPENING
    Replies: 13
    Last Post: 28th April 2011, 10:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •