Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
15th January 2020, 03:50 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,431
Belt grinder tracking wheel question
The tracking wheel on my almost complete belt grinder is an ebay ali one, and it seems to have a very high crown, which I think is causing it to be very (too) sensitive.
A tiny bit of movement has the belt darting across the wheels, so I was wondering if reducing the height of the crown, and widening it somewhat, might reduce the sensitivity?
Cheers.
Grinder tracking wheel 1.jpg
Attached Images
- Grinder tracking wheel 1.jpg (213.8 KB)
Read the full thread at metalworkforums.com...
-
15th January 2020 03:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Belt grinder wheel bore size
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 7th June 2019, 12:50 PM -
Macson surface grinder wheel removal question.
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 30th December 2018, 11:50 PM -
Tracking Drum Sander Conveyer Belt
By Wolfs in forum GENERAL & SMALL MACHINERYReplies: 2Last Post: 1st February 2012, 07:12 AM -
Drive Belt Tracking on Performax 16-32 Drum Sander
By jaksam in forum GENERAL & SMALL MACHINERYReplies: 1Last Post: 8th January 2012, 08:11 PM