Page 1 of 3 123 LastLast
Results 1 to 15 of 31

Thread: Bit Storage

  1. #1
    Join Date
    Dec 2007
    Location
    Melbourne
    Posts
    3,277

    Default Bit Storage

    YEsterday I added to my collection a few small Icecream tubs of drill bits, Milling Cutters and Taps. I think the old bloke must have been bringing one home a week from work all his career. He said he intended to buy a small mill and lathe for home in retirement but his wife had other plans.


    I don't have a mill yet but hope to be able to do some in the lathe once I make a collet chuck. Is there a difference in using the two vs four flute mills for this?

    Now the actual point of this thread I am interested in seeing (photos please) how you guys store these items so they are easy to find the size and don't get damaged?
    • Mill Cutters
    • Taps
    • Reamers
    • Drill Bits
    • HSS Lathe Tools



    I'm sure some of you guys will have some very innovative solutions that can inspire others or some very quick and easy ones.
    …..Live a Quiet Life & Work with your Hands

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2008
    Location
    Charlestown NSW
    Age
    65
    Posts
    899

    Default

    Generally a two flute is called an "slot drill". If you look at the cutting end you will see that one flute is ground so that it extends past the centre. This enables you to drill a hole or plunge cut into the job then cut a slot by going sideways.
    A four flute is usually whats called an "end mill". If you look at the cutting end of one of these you will see that the ends of the flutes are the same length and except for the very small ones there is usually a centre hole in the end. You can't drill a hole or plunge cut with one of these. Only from an existing hole or from an edge.
    There are also variations on these. You can also get 3 flute slot drills.

    bollie7

  4. #3
    Join Date
    Aug 2007
    Location
    Melbourne
    Age
    68
    Posts
    1,417

    Default

    01.jpg
    The wooden blocks are made from hardwood cutoffs (left over when making new door jambs) - or whatever nice wood scrap is at hand. These are about 20mm thick planks. I glue tree of them together, then saw to a rectangular shape to suit. Drill holes for whatever tools needs to fit. Then spray with clear laquer like Estapol. Add four thin rubber feet for stability. Done. Its practical, space saving, and looks good.


    I highly recommend FC cutters (also called throwaway cutters). These have 3 lips, one of which is center cutting. They are suitable both as endmills and as slot drills, so no need to buy both:
    http://www.ebay.com.au/itm/Set-of-10-HSSCO8-FC3-milling-cutters-High-Quality-/281249756647?pt=LH_DefaultDomain_3&hash=item417bcab5e7



  5. #4
    Join Date
    Dec 2007
    Location
    Melbourne
    Posts
    3,277

    Default

    I got more 2 flute-Slot Drills than I did 4 Flute End mills. Can I assume that the 4 Flute therefore gives a better surface finish than the two, based on the description Bollie gave??


    CBA, Is there any issue with wood reacting with the metal and rusting? I think it has something to do with Tannin levels? Or does the lacquer you use seal it in?


    I did see someone say there were some good CD/DVD drawer liners from Ikea but I can't seem to find them on the website so they may have disappeared.
    …..Live a Quiet Life & Work with your Hands

  6. #5
    Join Date
    Nov 2011
    Location
    Sutherland Shire, Sydney
    Age
    71
    Posts
    1,301

    Default Rust on shanks?

    Very impressive set-up you have there CBA. I am also concerned about rusting of the shanks in the wooden blocks. Will be most interested in how yours have survived with the Estapol coating.

    Alan...

  7. #6
    Join Date
    Nov 2007
    Location
    melbourne australia
    Posts
    2,621

    Default

    Quote Originally Posted by DSEL74 View Post

    CBA, Is there any issue with wood reacting with the metal and rusting? I think it has something to do with Tannin levels? Or does the lacquer you use seal it in?

    I did see someone say there were some good CD/DVD drawer liners from Ikea but I can't seem to find them on the website so they may have disappeared.
    Not sure about the wood causing rust, but I made a bit holder from a slab of 50mm thick HDPE.

    I also have some of the ikea racks you describe lining a drawer. They are excellent for storing drill bits, reamers, mills, etc.

  8. #7
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,649

    Default

    Quote Originally Posted by DSEL74 View Post
    CBA, Is there any issue with wood reacting with the metal and rusting? I think it has something to do with Tannin levels?
    ABSO-BLOODY-LUTELY with some species. Do not use She Oak or Silky oak. I made these a few years ago:


    The Brad points are HSS M2, and the Forstners are HC Tool Steel. The She Oak rusted them so badly that a couple that I hadn't used for 12 months or so had to be held in a vise while I would the drill bit hold off it...... (not forgetting the HSS M2 doesn't rust anywhere nearly as bad as Tool Steel).

    I changed them over to Huon Pine and oiled the insides of the holes - no problems.

    Now here's the thing: the bits that rusted the worst were German made HSS M2 brads. The set of Suttons/Frost twist bits are also HSS (that you can see have the business end into the She Oak) didn't rust AT ALL, and still haven't. The point being that the Frosties are made in China....
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  9. #8
    Join Date
    Nov 2006
    Location
    Heidelberg, Victoria
    Age
    79
    Posts
    2,251

    Default Storage containers,

    I'm in hospital three days a week, and keep my eyes open for things that may do for something else.

    I reckon the blood sample tubes would be ideal. They are about 100mm long, 14mm in dia, transparent with a snap on lid.

    I'll grab some next Monday and report back.

    Each day, metres and metres of clear plastic tubing gets tossed. This tubing is used for blood transfusions etc, so a bit suspect to reuse.

    Ken

  10. #9
    Join Date
    Jul 2010
    Location
    Melbourne
    Posts
    7,775

    Default

    Quote Originally Posted by DSEL74 View Post
    Can I assume that the 4 Flute therefore gives a better surface finish than the two,
    In a perfect world feed is worked out per tooth.... twice as many teeth means you can feed twice as fast.

    Quote Originally Posted by cba_melbourne View Post
    I glue tree of them together,
    Now that typo gave me a laugh

    I've many milling cutters in a chipboard(yellow tongue flooring) holder and haven't noticed a rust issue. But it would seem location has something to do with it.

    In my Hauser manual it makes mention of some tools been supplied in paraffined wood holders, which I thought sounded interesting, but google didn't come up with anything.

    Stuart

  11. #10
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,756

    Default

    Quote Originally Posted by DSEL74 View Post
    I CBA, Is there any issue with wood reacting with the metal and rusting? I think it has something to do with Tannin levels? Or does the lacquer you use seal it in?
    I did see someone say there were some good CD/DVD drawer liners from Ikea but I can't seem to find them on the website so they may have disappeared.
    If the wood has a lot of tannin in it then the steel should not oxidise/rust, instead it will form a black layer of Ferrous tannate which is inert and resits rust. It is usually quite a thin layer so unlike rust it won't affect accurate tool holding.

    The problem with furry/unfinished wood is it absorbs water and that's what causes the rust. The wood can either be sealed with something like a poly or a squirt of machine oil which absorbs into the wood and then also protects any steel.

    Folks with clean habits that completely clean their tools before they replace them may have more rust problems than those that place the tool back in the rack covered in lube etc.

  12. #11
    Join Date
    Aug 2007
    Location
    Melbourne
    Age
    68
    Posts
    1,417

    Default

    > I got more 2 flute-Slot Drills than I did 4 Flute End mills. Can I assume that the 4 Flute therefore gives a better surface finish than the two, based on the description Bollie gave??

    The more flutes, the more metal can the cutter remove per revolution, and the faster you can feed - on a rigid mill. The X3 is not that rigid.
    I notice no difference in surface finish based on number of flutes. What definitely makes a difference is if the flutes are really sharp. Blunt cutters cause larger forces and hence more chatter and worse finish. I do not recommend coated cutters for a hobbymill, uncoated ones are sharper. Some coated cheap Chinese endmills I once bought to try, went into the rubbish bin after being used once or twice. HSS-Co is what lasts by far longest for me, and therefore is cheapest to me. Solid carbide I only use on hard materials where its the only choice - I have chipped or broken several small carbide cutters over the years on my small Toyo milling head, they are very fragile and do not like the vibrations of a small mill (the toyo is 20 times lighter than the X3, but still I am careful with carbide cutters, good ones are expensive and it hurts to loose one).


    > CBA, Is there any issue with wood reacting with the metal and rusting? I think it has something to do with Tannin levels? Or does the lacquer you use seal it in?

    Some of the tools in these wooden block have been there for 25 years and still not the slightest trace of rust. After spraying the drilled blocks with varnish, the holes remain dry. The spray does not enter the holes. When storing a cutter (or whatewer it is) away, I liberally oil the shank with 3in1 oil. The wood abrorbs that oil and seems to protect tools very well. The holes are good fits to the tool shanks, so no humidity enters around the shank. The wood types I used lately are mostly plain Meranti, but some older blocks that I made probably 30 years ago were made from unknown wood salvaged from cigar boxes that the tobacconist gave away for free, top and bottom veneered with top qualit baltic beech plywood (yes I am also into moel airplanes) and the side veneerd in Mahogany veneer cutoffs. Too much work nowdays.... and no more cigar boxes around.

    But yes, there may well be some wood types that could cause corrosion - I just was fortunate not to have had them in my wood scraps bin.

  13. #12
    Join Date
    Jan 2004
    Location
    Mackay Qld
    Posts
    3,466

    Default

    What about some 25mm thick delrin sheet for your drill bit, taps etc, tool blocks

    It won't rust the tools an is impervious to oil.

    It not too bad for price.

    You may be able to score some as scrap at a plastic shop.

    Grahame

  14. #13
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    16,794

    Default

    although majority of my new ones are in original boxes and containers my old ones get tossed into a small tin and a yoghurt container many are difficult to read sizes so I purchased a drill gauge with intent of making a drill stand still not done yet.

    Now as of yesterday I have a small collection of long reach drill bits to store so watching for ideas.

  15. #14
    Join Date
    Nov 2007
    Location
    melbourne australia
    Posts
    2,621

    Default

    Quote Originally Posted by Grahame Collins View Post
    What about some 25mm thick delrin sheet for your drill bit, taps etc, tool blocks
    Delrin would make a fantastic bit holder. I have found Delrin sheet stock to be hideously expensive tho. That's why I used the HDPE. Offcuts are cheap. If you know where I can get offcuts of Delrin Grahame, I'd love to know.

  16. #15
    Join Date
    Jul 2006
    Location
    Adelaide
    Posts
    2,680

    Default

    you guys are too organised

Page 1 of 3 123 LastLast

Similar Threads

  1. Saw storage
    By phaser in forum WOODWORK - GENERAL
    Replies: 1
    Last Post: 5th December 2014, 04:39 PM
  2. PM storage???
    By JTTHECLOCKMAN in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACK
    Replies: 4
    Last Post: 29th June 2014, 09:59 PM
  3. Tap and Die storage
    By bts in forum METALWORK FORUM
    Replies: 16
    Last Post: 17th July 2012, 07:42 PM
  4. Storage - When is enough, enough?
    By Stuart in forum COMPUTERS
    Replies: 16
    Last Post: 15th September 2007, 01:46 PM
  5. Storage
    By forge in forum THE GARDEN SHED
    Replies: 14
    Last Post: 26th August 2006, 06:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •