SAM_0589.jpgSAM_0590.jpgOld goat is back.
A very well made drill grinding attachment originally with a Servian T & C grinder. Yes I do use recessed one side wheels if I have some drills to sharpen. All materials are of high standard and workmanship is tops. I would date it at 1980 or so. The pivot position and drill overhang is changeable depending on drill diameter. Two different locating plates for the front of the arm change the size range from 12-22mm to 22-40mm. More complex in the pivot design but can be copied in a work shop. Once the drills have gone thru this you can hog the material out.
Drilling is the most used operation and receives the least attention.
BC.
Attached Images




Read the full thread at metalworkforums.com...