Buying small amounts of bright round bar in Sydney?

**PDW** · 13th June 2012, 01:15 PM

Since I don't spend all that much time here any more, I've lost track of places to buy small amounts of metal.

Right now I'd like to lay my hands on some bright round bar, 7/8" or 22mm, don't need more than 600mm but I'll happily buy a metre or 2. I need to make a new screw & shaft for my $58 surface grinder.

Where can I get it, preferably reasonably close to Parramatta?

Thanks.

**Jon_77** · 13th June 2012, 01:42 PM

Edconsteel in Marigold road, Revesby is about as close as you'll get for a decent selection.

Metaland?? down in Silverwater on Silverwater road may sell it (entrance is via a back street, off Carnarvon St, Stanley St I believe.

Cheers
Jon

**pipeclay** · 13th June 2012, 02:17 PM

Even try Edcon at Blacktown.
If you can find what you want in an off cut it will be less 40% at the moment.

**PDW** · 13th June 2012, 02:20 PM

Originally Posted by pipeclay

Even try Edcon at Blacktown.
If you can find what you want in an off cut it will be less 40% at the moment.

Blacktown is close enough though Silverwater is even closer, so I'll check both of them out.

Thanks.

PDW

**Andrew C** · 13th June 2012, 02:51 PM

There's a bloke called George, who runs an offcut shop through eBay and quicksales.com.au, who often sells small quantities of bright steel in various configurations. Seller name is 'offcuts-galore'.

I've bought rod and plate from him a few times and he's pretty easy to deal with.

Thread: Buying small amounts of bright round bar in Sydney?

Thread Tools

Search Thread

Buying small amounts of bright round bar in Sydney?

Similar Threads

Small round mirrors

Source of brass solid round in Sydney

Small round table

Buying small qty radiata pine in Sydney.

PEG1000 availablity in small amounts

Tags for this Thread

Posting Permissions