Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 22 of 22
Thread: Chinese electrical contactors
-
11th July 2013, 09:13 AM #16Senior Member
- Join Date
- Oct 2011
- Location
- Newstead Victoria
- Posts
- 459
Sparkies are a protected species.Have a licence too. Think of the set up costs for a Sparkie to go it alone.1 half decent ute,few ladders.multimeter and a few hand tools.A decent lathe mill tooled up cost far more.And we get treated with suspicion when you want a 3 phase plug or switch when you go to the wholesalers.I ask the question. John.
-
11th July 2013 09:13 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th July 2013, 09:50 AM #17GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
17th July 2013, 07:57 PM #18Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
ha ha.... Today a 6 pole change over switch arrived...
It is to switch between vertical and horizontal heads...
Why 6 poles I hear you ask?
Well the horizontal motor has a electromagnetic brake that is actuated when the stop button is pressed.... I am sure you are now asking "so what, the brake will be connected to the motor and disengage when power is applied to the motor" Which is yes, but the machine has a jog button that will disengage the brake for a maximum of 30 seconds for jogging the motor to change speeds..
So a six pole is needed..
The licenced person wired it in and all is good, I can flick it one way for horizontal spindle and the other for vertical.... I just wish the table was bigger on this mill....Light red, the colour of choice for the discerning man.
-
16th September 2013, 09:12 AM #19Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
Another contactor question...
This is for the 10EE... I have to replace the original that has developed a dislike for my RPC.... Simply put the voltage drop when I kick the MG in makes the contactor drop out.... It is an old Cutler Hammer from the 1940's...
I installed a SquareD modern contactor and no problems...
The question this time is about those overload devices they fit onto the contactor.... How do they adjust them and how do you know what size to get? Do I get something along the lines of this? Thermal Overload 5.5Amp - 8.0Amp - TO1/1312, Electrical Supplies, Online Electrical Wholesaler, Electrical Accessories, Electrical Wholesaler Brisbane, Electrical Wholesaler Sydney, Electrical Wholesaler Melbourne
The plate on the motor says 415V 5.85 amps.... Which would be per phase..Light red, the colour of choice for the discerning man.
-
16th September 2013, 10:46 AM #20Intermediate Member
- Join Date
- Jan 2012
- Location
- Melbourne
- Posts
- 44
Hi RC, Mine has been replaced with a Sprecher Schuh 7.5 amps, set on 6 amps. It will still pop a 20A breaker on the sub-board, starting draw is pretty high. In your link, set by rotating the blue pointer to where you want it. Neil
-
16th September 2013, 02:14 PM #21GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
make sure the O/L you select is same make as contactor...they are not universal...meaning one manufacturers will probably not fit anothers...although some do ...with a pinch
ideally select one with rated FLA amps of motor to be mid-range on O/L block scale...ie not at end of range...
edit....mmm just had a look and its a toss up between the the 4 - 6amp or the 5.5 - 8amp
so I'd go the 5.5-8 mmmmm maybe the 4-6 oh what the heck..either or will do
also be awar that most O/L's these days have allowance for overloading on the setting range. Back in the dark ages one set the O/L to fla plus about 10%, but you dont need to do that today with good O/L's
-
16th September 2013, 05:32 PM #22Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
Thanks, I bought that one I linked to and a 32 amp 415V contactor from the same place.... I bought one previously from sparky direct and the quality was good, which was amazing considering the price...
Light red, the colour of choice for the discerning man.
Similar Threads
-
Electrical & CFM
By Chris Parks in forum DUST EXTRACTIONReplies: 11Last Post: 14th June 2009, 12:03 AM -
New Electrical Bushes
By TeZZaP in forum HAND TOOLS - POWEREDReplies: 19Last Post: 23rd April 2008, 02:23 PM -
electrical help
By Harry II in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 22Last Post: 29th October 2006, 08:44 PM