Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Chuck jaws
-
6th February 2020, 09:10 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,433
Chuck jaws
The 200mm 4-jaw I recently fitted to my lathe has been giving me a bit of grief, and it turns out that the jaw surfaces used for gripping pipe/bar (the full length jaw surfaces) are meeting at the rear of the jaws leaving a gap at the front. The gap is 13 thou on one pair, and 15 thou on the other pair.
Is that considered acceptable? If not, how do I go about fixing this please?
Read the full thread at metalworkforums.com...
-
6th February 2020 09:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
VM 120 chuck jaws
By artful bodger in forum WOODTURNING - GENERALReplies: 7Last Post: 5th December 2016, 09:52 AM -
More chuck jaws
By BobL in forum WOODTURNING - GENERALReplies: 26Last Post: 6th March 2011, 08:33 PM -
Chuck Jaws
By nosnow in forum WOODTURNING - GENERALReplies: 2Last Post: 25th September 2010, 04:48 PM -
Grinding chuck jaws
By jomac6 in forum THE HERCUS AREAReplies: 0Last Post: 15th June 2009, 11:56 PM -
Getting my first Chuck with jaws ??
By killerbeast in forum WOODTURNING - GENERALReplies: 24Last Post: 29th November 2007, 05:33 PM