Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 20
Thread: Cost of Propeller Boring
-
13th December 2013, 03:40 PM #1Senior Member
- Join Date
- Apr 2009
- Location
- Kingswood
- Posts
- 422
Cost of Propeller Boring
A friend of mine is constructing a 19 foot steam launch.
The 20 inch propeller has been taper bored to fit the shaft at a local commercial shop.
He had to go commercial because no one in our circle of contacts had a lathe big enough.
It was a fill-in job and took over 3 months, for a cost of $1100.
Propeller on boat.jpg
The cost 'sounds' excessive, but was it ?
John.
-
13th December 2013 03:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th December 2013, 04:54 PM #2future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
Not to sure if its expensive but we charge $70 AN HOUR for off the street work.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
13th December 2013, 05:07 PM #3GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Hmm interesting. My first questions would be Who was going to wear it if things dont turn out right? and Whats the prop worth?
While $1100 sounds a lot it reminds me of a plumber I knew who was complaining about the $75 he was charged for a piece of S/S cut to size for the splashback of a small vanity. I had a little sympathy for him until I found out the said vanity was $1500!
Stuart
-
13th December 2013, 05:57 PM #4SENIOR MEMBER
- Join Date
- Apr 2012
- Location
- Healesville
- Posts
- 602
The cost was likely a result of the time and materials of making a fixture to hold it in the lathe.
-
13th December 2013, 06:29 PM #5Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
Geez that is cheap, places are $50 an hour more around here...
I would not think $1100 that excessive, imagine trying to hold the workpiece in the first place.. May have had to make a custom chuck jaws to grip it...
Although maybe milling it might have been a better way to do it...On a CNC mill..
Remember to the shop it was only an $1000 job..... GST is $100... So at $120 an hour, only an eight hour job...Light red, the colour of choice for the discerning man.
-
13th December 2013, 06:45 PM #6Senior Member
- Join Date
- Apr 2009
- Location
- Kingswood
- Posts
- 422
Thanks guys for the comments, always good to get a cross-section of opinions and to get a real-world point of view.
As an aside, it appears there is quite a bit of activity associated with steam launches, there is even a magazine published about 4 times per year.
John.
-
13th December 2013, 09:16 PM #7Mechanical Butcher
- Join Date
- Oct 2004
- Location
- Southern Highlands NSW
- Posts
- 920
A friend of mine has a steam launch, "Brillig". He bought it 2 weeks after his first experience in one as an invited passenger, such is the attraction for some people.
His favorite fuel is old hardwood fence palings soaked in chip fat, which he reckons is only a bit less energy dense than coal.
Regarding the prop boring cost, it needed a big lathe but a pretty straightforward faceplate job I'd've thought.
It would then have been slotted for a key?
Jordan
-
13th December 2013, 11:05 PM #8Senior Member
- Join Date
- Apr 2012
- Location
- Melbourne
- Age
- 57
- Posts
- 122
Fairly large prop.
Cost comes out to about ten hours labour.
Bore and key to suit existing shaft.
sounds about right to me.
-
14th December 2013, 01:06 AM #9GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
interesting
-
14th December 2013, 07:22 AM #10New Member
- Join Date
- Oct 2013
- Location
- South Australia
- Posts
- 3
-
14th December 2013, 08:03 PM #11SENIOR MEMBER
- Join Date
- Jun 2011
- Location
- Australia east coast
- Age
- 71
- Posts
- 1,469
-
14th December 2013, 09:32 PM #12GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
-
14th December 2013, 09:36 PM #13Philomath in training
- Join Date
- Oct 2011
- Location
- Adelaide
- Age
- 59
- Posts
- 3,149
-
14th December 2013, 09:54 PM #14Senior Member
- Join Date
- Sep 2008
- Location
- Riddells Creek
- Posts
- 300
I have done tapered bores on my Vertical milling machine by tilting the head and clamping the job to the spindle.
-
15th December 2013, 12:05 PM #15SENIOR MEMBER
- Join Date
- Jun 2011
- Location
- Australia east coast
- Age
- 71
- Posts
- 1,469
What's wrong with clamping the compound off of your lathe (or similar) to the mill table, dialing in the angle and going for it?
Really the biggest hassle with a job like this is getting the prop set up on the face plate etc in the first place. If it's got a pilot bore or an existing hole you can indicate off, not so bad. But I'd rather do it with the face plate horizontal so gravity was my friend and then lift the whole assembly into place once dialed in if I couldn't hold the prop in place with a live centre and clamp everything down.
Good job for a vertical boring mill if you have one - which I don't.
Then there's the keyway which needs a slotter with tilting table or tilting slotting head to match the taper. That would be a PITA to set up on my slotter because the head doesn't tilt and I may not have the clearance on a 20" prop. Might be a possibility on a shaper or planer if you made a custom angle plate to match the taper. Maybe you could make a custom keyway broach that had the correct angle and a milled slot then use a press to drive the broach. More than one way to skin a cat but it all takes either more time or more machinery.
All in all perhaps the price isn't so unreasonable for a one-off, when I think about it.
PDW
Similar Threads
-
I am looking for someone to make a wooden propeller.
By LachlanT in forum WOODWORK - GENERALReplies: 6Last Post: 30th November 2011, 08:26 PM -
How a Propeller pattern is made
By canado in forum MISC BOAT RELATED STUFFReplies: 1Last Post: 16th December 2009, 08:50 AM -
Cost / m3 to cost / lineal metre calculators
By Blocklayer in forum WOODWORK - GENERALReplies: 2Last Post: 4th November 2005, 06:58 PM