Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
17th February 2020, 08:50 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Anyone have a Crown tapping head?
I bought a tapping head from ebay last week and it has arrived but is non-functional - it has a bit missing (the cam to drive the tap when tapping), feels like it was lubricated with something with a viscosity about that of cold honey and I think the clutch nut is a ring-in as the 1MT shaft that protrudes does not have enough length to engage in a 1MT socket.
It is a nice English made unit though, so I would like to repair it. Does anyone have one of these and can post some pictures? I have a fair idea what the cam should look like so no disassembly needed, but the clutch nut is a concern, as is the whole clutch (the clutch material looks remarkably new, so could be a replacement...)
Michael
Read the full thread at metalworkforums.com...
-
17th February 2020 08:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Tapping head advice request
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 22nd November 2018, 06:50 PM -
Anyone know about Crown tapping heads?
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 16th November 2018, 07:20 PM -
VICTORIA 100 Crown Seal Coopers + 16 Crown Seal Kingfisher Beer Bottles For Sale
By thumbsucker in forum MISCELLANEOUSReplies: 0Last Post: 20th November 2017, 06:57 PM -
thread tapping head
By tanii51 in forum METALWORK FORUMReplies: 4Last Post: 15th August 2010, 06:58 PM -
source for steel round head and flat head slot screws?
By womble in forum FINISHINGReplies: 6Last Post: 1st July 2007, 11:31 PM