Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 61 to 62 of 62
Thread: CTC Face Mill - Any Users?
-
6th January 2011, 08:38 AM #61GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
6th January 2011 08:38 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th January 2011, 01:41 PM #62.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Test Cuts
I passed the cutter over a piece of 4E cast bar..
The first cut was 0.5mm deep with a spindle speed of 100 rpm and a feed rate of 17mm/min. A virtually flawless finish. The next cut was at 160 rpm with a feed of 29mm/min. The final cut was at 860 rpm and 29mm/min feed.. Slow and steady wins the day.
Similar Threads
-
50mm Face Mill and 10 Mitsubishi Inserts for $CHEAP
By markjaffa in forum METALWORK FORUMReplies: 18Last Post: 11th September 2010, 02:23 PM -
Face Mill V End Mill
By eskimo in forum METALWORK FORUMReplies: 8Last Post: 31st August 2010, 03:19 AM -
No. 0 Mill Serial Number and Mill at Work Photos
By Anorak Bob in forum THE HERCUS AREAReplies: 1Last Post: 30th December 2008, 03:31 AM -
powered respirator, full face or 1/2 face??
By old_picker in forum HAND TOOLS - POWEREDReplies: 7Last Post: 13th December 2008, 09:58 AM -
Comparison Between C.S Mill & Bandsaw Mill
By echnidna in forum SMALL TIMBER MILLINGReplies: 2Last Post: 7th October 2007, 04:26 PM