Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
15th March 2015, 11:31 PM #1New Member
- Join Date
- Jan 2015
- Location
- Australia
- Posts
- 5
WANTED - Custom metalwork WILL PAY
Hey guys! I'm not sure if I'm posting in the right place, but I'm looking to have some custom metal work done. It seems pretty simple, just some cutting, grinding and welding. I just don't have the tools or the experience and would pay for someone to help me out with this . I'm located on the eastern side of Melbourne.
009.JPG
exact dimensions to anyone who is interested. PM me
THANKS
-
15th March 2015 11:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th March 2015, 10:35 AM #2
What is it? Some sort of pry bar to lift the end of a machine??
…..Live a Quiet Life & Work with your Hands
-
16th March 2015, 05:40 PM #3New Member
- Join Date
- Jan 2015
- Location
- Australia
- Posts
- 5
-
16th March 2015, 07:52 PM #4Senior Member
- Join Date
- Nov 2008
- Location
- Qld. Australia
- Posts
- 417
Is this for removing damaged boards from a pallet to repair them? Many years ago I made a couple for the place I worked at using angle iron and 1" gal pipe for the handle. I might be wrong and the one you have is for using on the side of a pallet to move or lift it judging by the gap between the end bits. I'm a bit far from you to help. Should be fairly easy to make.
Nev.
-
16th March 2015, 11:04 PM #5New Member
- Join Date
- Jan 2015
- Location
- Australia
- Posts
- 5
Yup! well not exactly..I'm looking to disassemble them to reuse the wood. Hopefully without damaging the boards. Yes, this one is designed to pivot on the central support pieces and pry out the top and bottom layer of the pallet.
It doesn't seem too difficult to make but I don't have access to the tools or the knowledge to make them :/ Do you know of any way I can get them made or buy them here in melbourne?
-
17th March 2015, 08:27 AM #6Senior Member
- Join Date
- Mar 2009
- Location
- Melbourne
- Age
- 54
- Posts
- 380
G'day Yowwai,
I'd be happy to knock it up for you.
I'm in Fawkner if that helps.
Just shoot me a PM.
Cheers,
Greg.
-
17th March 2015, 08:41 AM #7SENIOR MEMBER
- Join Date
- Jul 2014
- Location
- Gold Coast Australia
- Age
- 67
- Posts
- 519
Which side of Melbourne are you in, I have a friend down there that could put one together for you. He's in Keysborough if that's close by. PM me for details if it is of help.
-
17th March 2015, 09:15 AM #8
If all else fails, PM me and we can work something out mate.
We can move things around quite easily by courier if need be.
MattWarning Disclaimer
Similar Threads
-
Turkish Metalwork
By Anorak Bob in forum METALWORK FORUMReplies: 7Last Post: 3rd October 2014, 07:44 AM -
Gumtree Ad - Wanted two custom rolling pins to be made
By Sir Stinkalot in forum WOODTURNING - GENERALReplies: 0Last Post: 2nd March 2014, 02:13 PM -
Custom work wanted
By audrey in forum ANNOUNCEMENTSReplies: 12Last Post: 19th September 2011, 01:31 PM -
My Metalwork Course
By Tez2 in forum METALWORK FORUMReplies: 9Last Post: 28th May 2009, 04:02 PM -
I Hate Metalwork
By echnidna in forum METALWORK FORUMReplies: 15Last Post: 9th February 2006, 07:06 PM