Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Dawn No.7 Quick Release
-
13th July 2008, 10:39 PM #1
Dawn No.7 Quick Release
Greetings All, I need some help with a picture if possible from some body that has a Dawn No. 7 woodworking vice with quick release, I rescued this vice from some one that was going to throw it away some time ago, you see the quick release has a part missing, and is the actual part that screws underneath to hold the flat bar that holds the nut against the screw, and also what sort of spring is used to return the actuating lever to its lock? position, is it a coil type spring? I think I used a clock wind up spring as a poor excuse for a fix up some time ago, the problem is when I try to clamp something tight the nut slips out of the screw and looses its grip, I had a small bracket holding it in place but it is not working very well, I included some pics, sorry they are a bit blurry, I want to see if I can make the missing part, I'll post this in the woodworking forum as well, any advise will be greatly appreciated.
Richard.
-
13th July 2008 10:39 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th July 2008, 11:04 PM #2
Similar Threads
-
mounting quick release vise through apron?
By SilverSniper in forum WOODWORK - GENERALReplies: 13Last Post: 23rd January 2009, 08:26 AM -
quick release on vice
By astrid in forum WOODWORK - GENERALReplies: 15Last Post: 10th January 2008, 06:16 PM -
Quick release toggle clamps
By Tiger in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 15Last Post: 26th November 2007, 09:13 PM -
Problems with 7 inch Carbatec quick release vice
By Tiger in forum HAND TOOLS - POWEREDReplies: 3Last Post: 5th April 2007, 11:04 AM -
Router quick release
By finnster in forum TRITON / GMCReplies: 10Last Post: 31st December 2002, 01:50 PM