Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 18 of 18
Thread: The Deckel has landed
-
23rd August 2013, 04:15 PM #16
Its ok. I went out to check colour and to put on a second coat and I could not detect any Pink Light Red colour in the paint. "I feel better now".
Dean
-
23rd August 2013 04:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
24th August 2013, 12:13 AM #17
-
24th August 2013, 11:34 AM #18SENIOR MEMBER
- Join Date
- Oct 2012
- Location
- Australia
- Posts
- 765
I still think you need to pull the shaft, it maybe just a toasted bearing, I found that there is a path for swarth to get into the gearbox if the covers and wipers are not fitted and there is no way to get it out without washing out the gear box, maybe some swarth has gotten into the bearing? but it would be also a good idea to check out the gears, especially since you are getting axial play, My head hurts even thinking about trying to find/make a replacement gear.
Even without taking out the shaft, you would be able to get an idea by taking off the rear bearing cap.
-Josh
Similar Threads
-
Deckel FP2LB
By RayG in forum METALWORK FORUMReplies: 265Last Post: 3rd September 2013, 12:49 PM -
Prvomajska AL-100 Deckel Clone
By Toggy in forum METALWORK FORUMReplies: 2Last Post: 16th March 2013, 08:31 PM -
I shrunk my Deckel FP1 ...
By MuellerNick in forum METALWORK FORUMReplies: 16Last Post: 13th September 2012, 01:41 PM -
Where's the Deckel mill?
By neksmerj in forum METALWORK FORUMReplies: 50Last Post: 19th May 2011, 12:32 AM -
Greg's Deckel????
By neksmerj in forum METALWORK FORUMReplies: 1Last Post: 9th March 2011, 09:31 PM