Well seeing as we quite a few Denbigh owners here I though i would start our own Denbigh register. Here's my trio.
IMG_0522.jpg
Here's my latest acquisition serial number 749. its a early model C with a short swivel table. i got it at a deceased estate clearing sale for about 1/2 scrap value. Its had a Dulux rebuild by the previous owner and is missing all the brass plates and some of the covers.
IMG_0523.jpg
Under all the belts and other crap is another mill. Serial number L4249. It is a later model with a larger overarm and a upgraded spindle design. This was the first machine tool i bought, I think I was about 14 at the time. Ive never had it operational, when I got I cleaned it up and we were in the process of putting 3 phase on the shed and the opportunity to buy a property that already had a machine shop came up. We ended up moving house. With a good turret mill to use i didn't end up getting my denbigh going but its still on the list of projects, so it will get done someday.
IMG_0524.jpg
Serial number 1300. I'm in the process of stripping this mill for parts. It has most of one of the tee slots ripped out and has had a hard life. its made up of the bad bits of the previous owners 2 mills. I'm going to use some of the parts to replace the missing bits on the green one. I'm going to try and make a square with part of the knee, and maybe a straight edge with part of the column. I have also got 3 other mills to keep these company.