-
3 Attachment(s)
Denbigh mill register
Well seeing as we quite a few Denbigh owners here I though i would start our own Denbigh register. Here's my trio.
Attachment 319464
Here's my latest acquisition serial number 749. its a early model C with a short swivel table. i got it at a deceased estate clearing sale for about 1/2 scrap value. Its had a Dulux rebuild by the previous owner and is missing all the brass plates and some of the covers.
Attachment 319465
Under all the belts and other crap is another mill. Serial number L4249. It is a later model with a larger overarm and a upgraded spindle design. This was the first machine tool i bought, I think I was about 14 at the time. Ive never had it operational, when I got I cleaned it up and we were in the process of putting 3 phase on the shed and the opportunity to buy a property that already had a machine shop came up. We ended up moving house. With a good turret mill to use i didn't end up getting my denbigh going but its still on the list of projects, so it will get done someday.
Attachment 319466
Serial number 1300. I'm in the process of stripping this mill for parts. It has most of one of the tee slots ripped out and has had a hard life. its made up of the bad bits of the previous owners 2 mills. I'm going to use some of the parts to replace the missing bits on the green one. I'm going to try and make a square with part of the knee, and maybe a straight edge with part of the column. I have also got 3 other mills to keep these company:U.