Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
28th March 2020, 07:11 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,401
Small diameter plastic oil lines on mill - what sort of tube?
Looks like I need to replace one of the small oil lines on the knee of my TOS mill as its about 20mm too short to connect to the pump.
There's no pressure as such, just a few drops of oil every 5 seconds or so to lube the way.
Any idea what type the original tube might have been? Its 3mm ID, transparent, quite hard, and a brown colour. Possibly it was soft and clear when it was new.
I was thinking of just using clear flexible PVC tube to replace it unless anyone has a better suggestion.
Steve
Read the full thread at metalworkforums.com...
-
28th March 2020 07:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
[MEL] HDPE Tube Diameter (100 to 150mm) 1 metre length
By Bismar in forum WOODWORK - Tools & MachineryReplies: 8Last Post: 15th April 2017, 01:40 PM -
Increasing inside diameter of brass tube
By rrjtedge in forum METALWORK FORUMReplies: 7Last Post: 19th November 2013, 06:21 PM -
aussie made plastic sheet to draw straight lines?
By timberpassion in forum WOODWORK - GENERALReplies: 3Last Post: 6th March 2012, 08:56 AM -
Small Diameter Macadamia- How to mill?
By willcall in forum SMALL TIMBER MILLINGReplies: 17Last Post: 31st December 2011, 10:17 AM