Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Disc Sander RPM
-
31st July 2019, 09:50 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,401
Disc Sander RPM
I've just acquired a 2nd Bench grinder, with a Multitool sanding attachment fitted to one side. Since other end of the grinder is vacant, I am thinking on machining a 230 mm aluminium disc to be used as a disc sander. Having looked at the rpm of some of the bigger disc sanders available I'm now a bit concerned that the 2850rpm will be to high.
having a 230 mm alloy disc flinging around my shed is not something I want to experience.
Read the full thread at metalworkforums.com...
-
31st July 2019 09:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Sherwood 6 x 9in Belt/Disc Sander - trimming the disc velco backing?
By Wanderanwills in forum GENERAL & SMALL MACHINERYReplies: 2Last Post: 26th March 2019, 03:25 PM -
Sanding discs for face plate sander/disc sander
By Waldo in forum WOODWORK - GENERALReplies: 2Last Post: 19th April 2005, 05:49 PM