Thread: anything better then a dremel?

I bought a Foredom from the US for about $250 when I had the same situation.
Much better machine and has variable sized colletts available. See it here, looks like the price is up a bit and postage is expensive. It wasn't available in Australia when I bought mine, but you might find it here now.
If you buy from states you need the 220V model and you can just get the plug changed.

Cheers, Ian

Yep,

Get the Foredom. These are just night and day over the dinky over priced dremels. But they do come at a price. (i supposed the pertinent question is to ask what you want to use it for?)

They are available in Australia, I notice Carbatec is one source but there are several other online mobs that sell them cheaper too. We use one at work and it really is a solid unit, but we really don't ask much of it either, nothing that a dremel wouldn't do in out situation. But they are much better quality.

The foot speed control is handy too.

Originally Posted by .RC.

Are there any small rotary tools out there better then a Dremel...

.

Yes.

This is what I use. Pencil air die grinder - there is no contest.

Air micro die grinder

Rob

Originally Posted by nearnexus

Yes.

This is what I use. Pencil air die grinder - there is no contest.

Air micro die grinder

Rob

Yes I agree. I have X 2 of these little tools and they are better than sliced bread . No overheating motor issues . I use one to sharpen the chainsaw teeth and also, those awkward jobs e.g., removing broken taps from small locations . The set of grinder bits that comes with the tool is not of much use . Buy a set of diamond tipped bits , cheap on ebay and the tool is so much more effective Mike BTW it sounds like a jet engine

Originally Posted by morrisman

Yes I agree. I have X 2 of these little tools and they are better than sliced bread . No overheating motor issues .

Yes, you can stall them without any problem. Also way more powerful.

Get some carbide burrs as well and quickly chew through steel, weld, alloy, easy as.

Can also mount them on the toolpost real easy.

They actually get colder the more air you put through them.

Rob

thanks everyone.... Have bought an air one... The dremel is under warranty so will send it away as well..

I agree with the previous posts wholeheartedly. I use and really like the micro air grinder. But I also got a small (Makita type) edge trimmer and have used the flexible shaft that came with my Dermel kit. That provides about the se speed as the Dremel but with power to spare.

Cheers,
Joe

I have had a Scintilla (Bosch) die grinder for about 45 years. Really good piece of kit. Plenty of power, unstallable, and takes 1/4 shank tools. I got it originally to do porting and polishing on Cylinder heads. It has a suitable neck that I am going to make a TPG attachment for the lathe.

Roger

Suhner is generally considered the rolls royce of these sorts of tools, have both a big 20 odd lb version and something dremel size, other than brushes, they seem to go forever despite virtual daily use...seen a few on grays from time to time.

Used to buy Dremel but the quality seemed to be gone.
Tool wouldn't last very long.
now just buy Bunnings Warrior brand for $40 odd.
If they blow up, bin it and get another.
I seem to get at least three years out of each one.

My air one arrived today... It was the expensive one from CTC tools.... Turns out it is made in Taiwan... Quality seems to be superb...

MICRO AIR GRINDER - STRAIGHT HEAD #G69

Fancy 4 bearing model eh You lucky devil.

I only have the two bearing model and I couldn't tell you where it's made - probably China. Oil these each hour and they go forever.

The main thing to get the best results is to reduce the tool bit overhand/shaft length by making sure it goes well into the collet.

I actually ran a 1/8" drill through the spare collet (in the open position) and I find that will grip the 3 mm and 1/8 shafted cutters equally well.

Anyway, we expect a full report on how well it thrashes the pants off of your old Dremel.

Rob

I have tried Dremels sometimes, but they are toys compared to my Minicraft MB1012.
It is the same size as a Dremel, but its 12V 100W motor is virtually indestructable.
I am using it for more than 25 years, and it is still going strong.
The high quality Rohm keyed chuck has a capacity of 0-6 mm, wich makes it a lot more versatile than the Dremel with its toy-chuck.

It is a shame, that Minicraft has disappeared from the market, but I have managed to buy two more of these drills second hand.
I bought them just in case my MB1012 would wear out.
Until now however, it is still going strong.
Would you believe I even drilled 6 mm holes in brick with it?

British made quality tools....

Cheers, Jan

Shinano (Japan) make a good air powered 3mm die grinder. At $271 the price is a few dremels or 5 CTC's..