Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 32
Thread: drill press vice
-
7th May 2014, 10:40 AM #1GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
drill press vice
opinions sought on best drill pres vice....I have 150mm unigrip Dawn. but its too big for table of the waldown..I thinking I need a 100mm for most work allowing easier fastening.
The 150mm is pushing the table slots to allow east setup and clamping
is there anything better than the dawn unigrip for a lot less $$
-
7th May 2014 10:40 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th May 2014, 01:42 PM #2Cba
- Join Date
- Aug 2007
- Location
- Melbourne
- Age
- 68
- Posts
- 1,417
You mean the red "Dawn Unigrip - made to Dawn specifications and quality requirements"? I bet it is made in China, just like the "precision drilling vises" from H&F and others. The only difference I can see, is the paint color. The blue H&F have an added oil nipple. I use one of these on the Waldown, the 100mm model. If anything, I sometimes wish I had bought the 125mm model.
Years ago I bought a Dawn vise, only the cheaper model as I use it on the welding table and did not want to ruin a good expensive vise. I was surprised it was made in China too. They just rivet their good name pate on it. That is how a hard earned good old brand reputation is converted into short term shareholder value.
-
7th May 2014, 06:30 PM #3
My dawn 125mm vice that i had for a year or two was made in Australia.When I checked at the time of purchase i did not find any dawn product that was not made in Australia, but times may have changed.
I love the vice and don't use any thing else on my drill press. It is head and shoulders above the other 4 or 5 that I have.
Grahame
-
7th May 2014, 10:32 PM #4
I think you will find the family bought the manufacturing back yo Australia a few years ago.
Sent from my GT-I9100 using Tapatalk
-
7th May 2014, 10:56 PM #5.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
You could always opt for the real deal Richard but there's a but.. the price.
019 (Large).JPG
More realistically, how about a small Palmgren vice from the States? http://www.ebay.com/itm/Palmgren-Dri...item461f46476d I have a couple of little Palmgren vices with 1 1/2 " jaws and a 3" tilting vice. Made well enough but not a match for the real thing.
Bob.
-
7th May 2014, 11:08 PM #6.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Is 75 bucks too much? http://www.toolexchange.com.au/images2/P1060404.JPG
-
8th May 2014, 04:05 AM #7GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
vice
hi all. i have no camera atm sorry.
i like my small nippy vice and the small record is not bad to.
http://www.ebay.co.uk/itm/Murray-Son...3D390563804682
like this one
http://www.ebay.com.au/itm/Irwin-Rec...item51b8448bfe
or this one
aaron
-
8th May 2014, 08:37 AM #8
I've been thinking about a drill press vice for some time now.
So after reading above I started looking at the Dawn 100 or 125mm vices.
They seem to do two models in aeg size; one around $80 and one around $300!!!
What's the difference?
Thx
Jon
-
8th May 2014, 09:45 AM #9GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
8th May 2014, 10:02 AM #10GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
8th May 2014, 10:03 AM #11GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
8th May 2014, 10:13 AM #12GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
-
8th May 2014, 11:29 AM #13.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
-
8th May 2014, 02:15 PM #14Cba
- Join Date
- Aug 2007
- Location
- Melbourne
- Age
- 68
- Posts
- 1,417
Do you think the red Dawn drill vise for under $100 is made in Australia? Maybe from local and imported ingredients . I simply cannot believe its possible to manufacture that cheap here. Our wages are just too high for such stuff.
I still had the box where my disposable bench vise for the welding table was packed. Have a good look at the print just below the red line between the vise picture and the bar code. It only cost me under $100 new. I do not believe it could be made here for nearly that sort of money. And that design is not worth more either.
Dawn_1.jpg
-
8th May 2014, 03:02 PM #15
It wasn't me that got it either
Similar Threads
-
Restored engineering/drill press vice
By RedShirtGuy in forum WOODWORK PICSReplies: 7Last Post: 7th October 2011, 01:51 PM -
drill press vice woes
By Grahame Collins in forum METALWORK FORUMReplies: 9Last Post: 20th May 2011, 02:18 AM -
Advice on drill press vice please?
By BoomerangInfo in forum WOODTURNING - PEN TURNINGReplies: 18Last Post: 20th May 2009, 08:54 PM -
drill press vice
By Redback in forum GENERAL & SMALL MACHINERYReplies: 9Last Post: 5th April 2005, 01:19 PM