Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Eye candy
-
27th September 2013, 07:29 PM #1SENIOR MEMBER
- Join Date
- Jun 2012
- Location
- SA
- Posts
- 1,478
Eye candy
I've got a full sized tripod now, so I can get a bit more artistic with my videos.
Here's the latest effort.
Old lathe magic - my Schaublin 102 - YouTube
Cheers
RobThe worst that can happen is you will fail.
But at least you tried.
-
27th September 2013 07:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th September 2013, 10:29 PM #2GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 2,636
Very sweet lathe you have there, as you said, full of character.
One thing I found annoying with the video was static background noise (not the Minors, Doves and other bird life!).
Great vid though, very enjoyable-Scott
-
27th September 2013, 11:21 PM #3SENIOR MEMBER
- Join Date
- Jun 2012
- Location
- SA
- Posts
- 1,478
The worst that can happen is you will fail.
But at least you tried.
-
28th September 2013, 10:23 AM #4Senior Member
- Join Date
- Oct 2011
- Location
- Newstead Victoria
- Posts
- 459
A very nice machine you have now compared to what it was at the start.There is one issue that can trap the unwary that is the anti clock wise in feed on the cross slide.
Drummond round beds have the same anti clock wise for the longitudinal feed. The Australian version is corrected with the normal clock wise rotation.
Very early Drummonds pre B type had 2 small gears at the tailstock end of the bed to compensate or the correct[well what is correct? what is the norm?]clock wise handle rotation.
Its is a challenge to remember what machine you are using.No room for ''old timers episodes''. cheers and enjoy your machine as we all have in its rebirth. J.
-
28th September 2013, 01:34 PM #5SENIOR MEMBER
- Join Date
- Jun 2012
- Location
- SA
- Posts
- 1,478
The reverse action cross slide feed is something that certainly takes concentration after using a modern lathe.
Schaubllin Yahoo group recon this is wrong on my lathe, but I'm not sure. The shaft and threaded bush may have been replaced at some stage.
The tailstock has been converted to Morse 1 at some stage, which apparently was quite a common modification.
The cross slide feed dials suggest that the screw thread is wrong, as they are incremented clockwise.
Been a challenging and rewarding exercise, and like Ewan I don't really need another lathe, but hey, makes life interesting, and it's only a very small outlay.
I seem to be good at accumulating more old mechanical stuff than I need
Cheers
RobThe worst that can happen is you will fail.
But at least you tried.
Similar Threads
-
'Eye Candy'
By MAPLEMAN in forum WOODTURNING - GENERALReplies: 17Last Post: 1st October 2013, 10:11 AM -
More eye candy from the show
By DaveTTC in forum HAND TOOLS - UNPOWEREDReplies: 4Last Post: 13th September 2013, 12:03 AM -
Candy twist..
By Jonzjob in forum WOODTURNING - GENERALReplies: 13Last Post: 25th September 2012, 09:05 PM -
click twice for candy
By mkypenturner in forum WOODTURNING - PEN TURNINGReplies: 9Last Post: 5th February 2012, 03:44 AM -
Ear candy
By Sebastiaan56 in forum MusicReplies: 11Last Post: 27th October 2007, 11:53 PM