Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Fine Finished Steel Angle
-
19th April 2021, 06:30 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,431
Fine Finished Steel Angle
I have a small length of steel angle 20x20x3.
It is not mill finish black steel.
Dimensions are very close to nominal, all corners are sharp and square, with a finish close to ground.
This may have been a special made for a particular application, and I just got an offcut.
Or, it is a manufactured part of an assembly as it has two 3 mm holes drilled through it and the shadow of a mounting point.
But, it is not painted or finish coated.
I have seen ground steel plate/bar offered for sale, but cannot remember ground angle.
Can this material be purchased ?
If so, where ?
I am interested in 10 m, to be used in lengths of 750 mm.
Keep well,
John.
Read the full thread at metalworkforums.com...
-
19th April 2021 06:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Narrow guage/ fine brass angle trim--where to buy in Aus?
By Starlo in forum BOX MAKINGReplies: 5Last Post: 19th August 2016, 07:17 PM -
Veritas Low Angle Jack Plane - PM V11 Steel
By JasonBF in forum HAND TOOLS - UNPOWEREDReplies: 1Last Post: 31st August 2012, 05:11 PM