Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Fish-mouthing rod or tube
-
25th June 2019, 02:40 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Fish-mouthing rod or tube
I'm making a large "clap-trap" for catching Indian Mynas. The frame is made from 8mm 304 SS. As I don't have TIG I have silver soldered the joints with 56% silver solder. To improve the strength of the joints I fish-mouthed the joints by securing the bar in a AXA tool holder and cutting the fish mouth with an 8mm solid carbide end mill (I don't own a milling machine). It works extremely well. As long as the end mill is the same diameter as the rod you get a perfect joint. The silver solder is expensive so a tight joint means I only needed a small amount to make the joint.
I'm sure I'm not the first person to use this method, but I thought I'd share it anyway. I'll certainly be using it again.
Attached Images
- fish2.jpg (97.1 KB)
- fish1.jpg (194.2 KB)
- clap trap.jpg (210.5 KB)
Read the full thread at metalworkforums.com...
-
25th June 2019 02:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Fish-mouthing rod or tube
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 23rd June 2019, 07:40 PM -
Oil on Fish
By Rodgera in forum WOODIES JOKESReplies: 3Last Post: 28th August 2009, 11:06 AM -
A few fish
By fisherman in forum WOODCARVING AND SCULPTUREReplies: 19Last Post: 23rd August 2008, 01:12 PM -
Some big fish
By Jack E in forum FISHINGReplies: 5Last Post: 16th August 2007, 10:59 PM -
Fish oil??
By aeg20boat in forum Links to: TIMBER & HARDWARE SUPPPLIERSReplies: 15Last Post: 28th August 2005, 10:37 AM